... through these fractures at different flow rates was simulated by solving Naiver-Stokes equations. The results show that tortures paths and the formation of eddies are more accentuated on the rough fracture than the smoother ones, and the tortuosity of the streamlines is related to the roughness...

... government proppant distribution fraction orientation perforation orientation simulation uniformity line optimization dontsov correspond wellbore flow rate perforation diameter proceedings particle scale case field scale case efficiency ARMA 23-348 A model for optimizing proppant...

... geomechanics radial flow permeability wellbore mfhdw pressure-transient analysis horizontal well flow rate reservoir surveillance geological subdiscipline production rate pressure drop pressure-derivative curve characteristic ARMA 23 0561 Pressure-Transient Analysis to Diagnose the Inefficiency...

..., volumetric flow rate, and other relevant parameters were systematically analyzed by using the developed numerical modeling. The proposed model can be used to evaluate the suitability of BHE applications with low thermal-gradient in southern California. INTRODUCTION The utilization of fossil fuels has...

... subdiscipline reservoir geomechanics full model plane symmetric model fluid dynamics united states government hydraulic fracturing fracture pressure drop newtonian fluid fracture geometry flow rate fluid flow symmetry symmetric cohesive element formulation viscosity hydraulic fracture pipe...

... equation drill string engineering pore pressure stability transient hydraulic model pipe permeability asia government wellbore integrity reservoir geomechanics flow rate failure index field data transient surge pressure borehole wall ARMA 23 164 Effects of Dynamic Surge Pressure...

... coefficient friction reduction rate flow rate oil reservoir ARMA 23 414 Rheology study and quantification of dynamic leak-off coefficient of slickwater for tight oil reservoirs Yun Wei Research Institute of Experiment and Detection, Xinjiang Oilfield Company, Karamay, China Leyi Zheng State Key...

... configuration spillway block protrusion flow rate mechanism ARMA 23 469 Effect of Joint Opening and Block Protrusion on the Hydraulic Pressure around Rock Blocks in Unlined Dam Spillways Karnati, V.R.1*, Saeidi, A.2 and Rouleau, A.3 Département des sciences appliquées, Université du Québec à Chicoutimi...

... was divided into 15 intervals by a multi-packer system. In this work, we present preliminary results of interval 8 in which two injection phases were performed with a 3.5 months gap in between. The two phases differ in the injected volume and injection protocol (pressure vs. flow rate controlled). Within...

... government flow in porous media geological subdiscipline pore pressure boundary juane subsurface storage sustainable development climate change flow rate analytical solution capillary fingering entry pressure social responsibility reservoir characterization pipe fluid flow model injection...

... designs, commonly employed to improve treatment distribution among multiple intervals, perforation friction is used to mitigate variation of slurry flow rates to different clusters. High values of perforation friction are usually achieved by reducing the number of perforations (Somanchi et al., 2017...

... event fault damage zone drilling operation norway government geomechanics reactivation pressure ppg pptf hesitation squeeze lcm treatment united kingdom government united states government hydraulic fracturing well control lcm flow rate threshold ecd us rock mechanic geomechanics...

... at a constant consumption rate. Considering that this resource is continuously being renewed by various forms of heat received, it is a sustainable energy (Olasolo et al., 2016). united states government permeability enhanced geothermal system fracture flow rate fluid flow roughness mechanism...

... vertical stress microfiber geologist united states government enhanced recovery geological subdiscipline test specimen collection pipe flow rate dry density testing platform new testing platform permeability measurement gas permeability ARMA 23 0753 A new laboratory testing platform...

... ABSTRACT The continuous and alternation injection-production operation modes through three injection wells and three production wells towards the single fracture was considered numerically to evaluate its effect on flow patterns and thermal performance, including aperture evolution, flow rates...

... the well design, flow rate, economic, and engineering limits for deploying caging successfully in the field. Our work shows that the two primary mechanisms for failure of a cage can be attributed to poor well-fracture connectivity due to poor well placement in uncertain stress fields or due to undersized...

... strength results was obtained from a deep-level gold mine in South Africa and factors causing this variation were determined. Factors such as tailings material properties, binder flow rate and curing affect the strength of backfill material. A strategy to maintain backfill strength consistency and improve...

... production control production logging upstream oil & gas wellbore integrity drilling operation reservoir characterization reservoir surveillance wellbore design flow rate inclination angle empirical correlation viscosity numerical model inclination find correction factor rop...

..., horizontal hydraulic fracture. To evaluate the fracture-diagnostic techniques at this site, we attempted to develop hydrogeological and geomechanical models on the basis of bottomhole-pressure measurements during injection tests with a predefined volumetric flow-rate profile, resembling a diagnostic fracture...

... to evaluate the stress states from the measured data. reservoir geomechanics observation equation borehole hydraulic fracturing flow rate reservoir characterization enhanced recovery diameter mpa principal stress equation water pressure upstream oil & gas rock mass syringe pump test...