Skip Nav Destination
18th International Conference on Multiphase Production Technology
June 7–9, 2017
Cannes, France
Issue navigation
All Days
Prediction of asphaltene precipitation risk in oil wells using a coupled hydro-thermodynamic model
Paper presented at the 18th International Conference on Multiphase Production Technology, Cannes, France, June 2017.
A study of wax deposition in pipeline using thermal hydraulic model
Paper presented at the 18th International Conference on Multiphase Production Technology, Cannes, France, June 2017.
Assessing hydrate blockage risk in oil pipelines: deploying a new transient simulation capability
Paper presented at the 18th International Conference on Multiphase Production Technology, Cannes, France, June 2017.
Wall shear stress measurements of horizontal two-phase slug flow for high viscosity liquids using constant temperature anemometry
Paper presented at the 18th International Conference on Multiphase Production Technology, Cannes, France, June 2017.
Flow structures in low-inclination stratified oil-water pipe-flows using laser-based diagnostic techniques
Paper presented at the 18th International Conference on Multiphase Production Technology, Cannes, France, June 2017.
An experimental study of two-phase flow in horizontal and inclined annuli
Paper presented at the 18th International Conference on Multiphase Production Technology, Cannes, France, June 2017.
Experimental investigation of vertical high-velocity two-phase flows in large-diameter pipes
Paper presented at the 18th International Conference on Multiphase Production Technology, Cannes, France, June 2017.
Transient simulations on ESP pump compared to measured data
Paper presented at the 18th International Conference on Multiphase Production Technology, Cannes, France, June 2017.
Multiphase downhole screw assembly (MDA) - A new chapter in conveying hydrocarbons
Paper presented at the 18th International Conference on Multiphase Production Technology, Cannes, France, June 2017.
Unstable well behaviour in gas well liquid loading - stability tests
Paper presented at the 18th International Conference on Multiphase Production Technology, Cannes, France, June 2017.
The use of surfactants for gas well deliquification: a comparison of research projects and developed models
Paper presented at the 18th International Conference on Multiphase Production Technology, Cannes, France, June 2017.
Velocity profiles in stratified two-phase flow: Comparison of measurements and model predictions
Paper presented at the 18th International Conference on Multiphase Production Technology, Cannes, France, June 2017.
Wall transform mechanism in a viscosity stratified turbulent flow
Paper presented at the 18th International Conference on Multiphase Production Technology, Cannes, France, June 2017.
Assessment and sensitivity analysis of multiphase flow pipeline models against experimental and field data
Paper presented at the 18th International Conference on Multiphase Production Technology, Cannes, France, June 2017.
Validation of a multiphase flow simulator using three-phase gas condensate field data
Paper presented at the 18th International Conference on Multiphase Production Technology, Cannes, France, June 2017.
Åsgard Subsea Compression - technology overview and operational experience
Paper presented at the 18th International Conference on Multiphase Production Technology, Cannes, France, June 2017.
Åsgard subsea compression inlet cooler - development, qualification and operation of world’s first passive multiphase subsea cooler
Paper presented at the 18th International Conference on Multiphase Production Technology, Cannes, France, June 2017.
Åsgard subsea compression and predictions of liquid surges
Paper presented at the 18th International Conference on Multiphase Production Technology, Cannes, France, June 2017.
Advances in modelling hydrodynamic slug flow in production systems
Paper presented at the 18th International Conference on Multiphase Production Technology, Cannes, France, June 2017.
CFD for multiphase flow in vertical risers
Paper presented at the 18th International Conference on Multiphase Production Technology, Cannes, France, June 2017.
Improvement of LedaFlow for churn flow in vertical pipes
Paper presented at the 18th International Conference on Multiphase Production Technology, Cannes, France, June 2017.
A model for liquid-assisted gas-lift unloading
Paper presented at the 18th International Conference on Multiphase Production Technology, Cannes, France, June 2017.
Minimum sand transportation conditions in multiphase pipelines: an assessment exercise
Paper presented at the 18th International Conference on Multiphase Production Technology, Cannes, France, June 2017.
Improving CO2 corrosion rate predictions through the use of corrosion assessment and flow modelling - A field case study
Paper presented at the 18th International Conference on Multiphase Production Technology, Cannes, France, June 2017.
Prolonged gas-condensate pipeline operation below minimum turndown rate
Paper presented at the 18th International Conference on Multiphase Production Technology, Cannes, France, June 2017.
The use of a low-cost gas-liquid flow meter to monitor severe slugging
Paper presented at the 18th International Conference on Multiphase Production Technology, Cannes, France, June 2017.
Decision analysis in multiphase flow: uncertainty, risk and application
Paper presented at the 18th International Conference on Multiphase Production Technology, Cannes, France, June 2017.
Tanzania gas development - flow assurance challenges
Paper presented at the 18th International Conference on Multiphase Production Technology, Cannes, France, June 2017.
Pressure drop measurements in low liquid loading three-phase flows
Paper presented at the 18th International Conference on Multiphase Production Technology, Cannes, France, June 2017.
Pressure drop in low liquid loading flows - the effect of a thin liquid film on the pipe wall
Paper presented at the 18th International Conference on Multiphase Production Technology, Cannes, France, June 2017.
Uncertainty evaluation applied to a model-based Virtual Flow Metering system
Paper presented at the 18th International Conference on Multiphase Production Technology, Cannes, France, June 2017.
Development of speed controlled pigging for low pressure pipelines
Paper presented at the 18th International Conference on Multiphase Production Technology, Cannes, France, June 2017.
Subsea water separation: a state of the art review, future technologies and the development of a compact separator test facility
Paper presented at the 18th International Conference on Multiphase Production Technology, Cannes, France, June 2017.
Unequal split of liquid content in parallel flowlines
Paper presented at the 18th International Conference on Multiphase Production Technology, Cannes, France, June 2017.
FLNG, a simple way to open Pandora’s Box
Paper presented at the 18th International Conference on Multiphase Production Technology, Cannes, France, June 2017.
Use of CFD for development of sand erosion control technology
Paper presented at the 18th International Conference on Multiphase Production Technology, Cannes, France, June 2017.
