Abstract

Aiming at reducing CO2 emissions for ironmaking, we consider and evaluate in this paper the possibility to replace a part of the fossil fuel - coal - usually used to produce pig iron with a renewable one - biomass. Our approach combines life cycle assessment and systems modeling.

Steel industry is responsible for more than 6% of the anthropogenic CO2 emissions and reducing the carbon footprint is today a matter of prime importance for iron and steelmakers. Since most of CO2 emissions result from using fossil coal as a fuel and a reductant for ironmaking, using renewable biomass instead looks attractive. Many scenarios (according to the biomass type, the biomass treatment process, the type of injection) are possible and have to be evaluated from environmental, economical and technical feasibility points of view, so that the best option could be identified.

First, to check the relevance of a biomass option for an actual pig iron plant located North East of France, the local availability of the biomass was verified and quantified. Then, life cycle assessment (LCA) was used to evaluate the environmental and economical feasibility of the different scenarios. Results of a screening LCA allowed us to proceed to a first selection of scenarios and to determine the hot spots of the whole route, i.e. from raw materials extraction to liquid pig iron. We found that replacing 20 % of the coke with biomass could save around 200 kg of CO2 per metric ton of pig iron produced, which represents a reduction of 10% of the total CO2 emissions of the whole route.

Thus, we have already shown that a small substitution of biomass for coke can have a noticeable impact on CO2 footprint. To go further towards an accurate LCA, we are improving the life cycle inventory, through the use of calculated data that precisely respect mass and heat balances. For that purpose, we are currently building mathematical models of the key unit processes (biomass transformation, iron ore sintering, blast furnace) using commercial flowsheeting software.

Introduction

Since 2005 the main CO2-emitting industries in Europe are subject to CO2 regulations in the form of quota limitations: companies that emit more than authorized quota have to buy extra permits for the CO2 they emit. In 2013, the allowed quota will be be significantly reduced, which entails a best CO2 management for CO2 emitting companies. Since steel industry represents more than 6% of the CO2 world emissions, reducing its carbon footprint is a matter of prime importance. Among the possible solutions to achieve this goal, we consider in this paper the possibility to replace a part of the fossil fuel - coal - usually used to produce pig iron with a renewable one - biomass - in the case of a real plant located in Lorraine, in the North East of France.

The classical iron and steelmaking route, a so called "first fusion" route, produces liquid iron from iron ores - mainly made up of iron oxides - and fossil coal. This route is based on three unit processes: the coke oven, the sintering unit and the blast furnace. The coke oven is the process where fossil coal is heated and devolatilized to produce a hard product containing about 90% of carbon, called coke. The sintering unit produces lumps of sintered iron ore from iron ore fines and fossil fuel such as anthracite and coke fines. Eventually, in the blast furnace, the sintered iron ores are reduced with a carbon-monoxide rich gas - result of the combustion and gasification of the coke - to form pig iron - i.e. liquid iron saturated in C - and a large amount of CO2. In order to reduce the CO2 emissions, a solution could be to replace coke - a fossil fuel whose combustion emits 3 tonnes of CO2 per ton of coke - with biomass, which is a renewable and CO2 neutral fuel, as long as the same amount of biomass burnt is planted back.

This content is only available via PDF.
You can access this article if you purchase or spend a download.