Skip Nav Destination
1-9 of 9
Int. J. Offshore Polar Eng. 33 (02): 157–163.
Paper Number: ISOPE-23-33-2-157
Published: 01 June 2023
... at different locations and the impact pressure on the seawall are investigated. It is concluded that the performance of the qaleFOAM is similar for both the scaled and full-scale modelling; the viscosity, turbulence, and air compressibility may be critical for the formation of the breaking waves, which...
Int. J. Offshore Polar Eng. 33 (02): 123–131.
Paper Number: ISOPE-23-33-2-123
Published: 01 June 2023
...) and their entrainment on the present application will be addressed in the future. The present algorithm is compressible that is to say, it allows for variation of density (as a function of pressure). For the present application, compressibility was applied to the air phase only, in which the air phase was considered...
Int. J. Offshore Polar Eng. 30 (03): 286–298.
Paper Number: ISOPE-20-30-3-286
Published: 01 September 2020
.... Sufficiently refined discretizations have been used in order to adequately capture the impulsive loads at wall. The simulations have been performed with SPH-flow, which solves the compressible Euler equations for liquid and gas, thanks to a Smoothed Particle Hydrodynamics (SPH) method. The three waves have...
Int. J. Offshore Polar Eng. 27 (02): 152–159.
Paper Number: ISOPE-17-27-2-152
Published: 01 June 2017
..., a corresponding numerical simulation with or without consideration of the compressibility of the fluids is also carried out by using OpenFOAM. All results are compared with the experimental data provided by the comparative study of ISOPE 2016. The results suggest that the unified equation in the IBM can well...
Int. J. Offshore Polar Eng. 27 (01): 18–26.
Paper Number: ISOPE-17-27-1-018
Published: 01 March 2017
... involved prior to such impacts is complex and includes the development of free-surface instabilities due to the shearing gas flow, the gas compression just before and after entrapment, and the emission of pressure waves into the liquid at the impact points. Furthermore, as the LNG is in a state close...
Int. J. Offshore Polar Eng. 23 (04): 241–253.
Paper Number: ISOPE-13-23-4-241
Published: 30 January 2014
... systems for LNG carriers. Based on Riemann solvers, SPH-Flow deals with two compressible fluids (liquid and gas) that interact with the impacted structure through a complete coupling. The liquid, the gas and the structure are modeled by different kinds of dedicated particles allowing sharp interfaces...
Int. J. Offshore Polar Eng. 20 (03).
Paper Number: ISOPE-10-20-3-233
Published: 01 September 2010
... focused on time-dependent consolidation characteristics, and no specific attention has been given to the evaluation of compressibility-related parameters. In this paper, a methodology was proposed for the estimation of the compression index using PCPT dissipation results. In order to reflect stress state...
Int. J. Offshore Polar Eng. 14 (04).
Paper Number: ISOPE-04-14-4-310
Published: 01 December 2004
... property Gulf deposit production control production monitoring Upstream Oil & Gas compressibility variation Offshore moisture content sediment thermal conductivity undisturbed sample settlement void ratio International Journal of Offshore and Polar Engineering Vol. 14, No. 4, December...
Int. J. Offshore Polar Eng. 2 (04).
Paper Number: ISOPE-92-02-4-251
Published: 01 December 1992
... to account for compressibility may readily be made and are indicated. Numerical results obtained by the various methods are compared with corresponding analytical results for a vertical circular cylinder. As an example of the methods" application, results are obtained for square cylinders. The ranges...
Product(s) added to cartClose Modal