... 2024 12 12 2024 12 12 2024 Copyright 2024, The International Society of Offshore and Polar Engineers data mining dnv model modeling & simulation prediction programme offshore pipeline intecsea model test result specimen compressive strength model uncertainty heat...

..., The International Society of Offshore and Polar Engineers thickness geometry international journal geology strength evaluation structure iso 5817 geologist resistance seam geometry standardization specimen steel structure misalignment imperfection fatigue strength weld seam geometry...

... geological subdiscipline pontoon operation geology reservoir geomechanics shutdown international journal frequency damage probability evaluation equation a4-model evaluation rotor displacement f-model spectrum strength offshore wind turbine subjected International Journal of Offshore...

... Engineering (ISSN 1053-5381) Copyright © by The International Society of Offshore and Polar Engineers Vol. 34, No. 1, March 2024, pp. 1 10; httpsdoi.org/10.17736/ijope.2024.et07 httpwww.isope.org/publications A Comparison of the Fatigue Strength of Repair Welded Nodular Cast Iron Materials for Usage in Wind...

... static axial load and the fatigue strength (detail category) for the fastener subjected to normal stress of nominal sizes M12, M16, and M20 (strength grade 10.9). International Journal of Offshore and Polar Engineering (ISSN 1053-5381) Copyright © by The International Society of Offshore and Polar...

... and Polar Engineers united states government hummock structure ministry russia government indenter russian federation construction strength asia government experiment interaction keel upstream oil & gas europe government international journal similarity load basin croasdale...

... working on a driving force of crack growth rate. Results show that the yield strength of 316L SS will increase the driving force of crack growth, whereas the hardening exponent will reduce the driving force. Both cold working and hardening at the crack tip can increase the driving force of crack growth...

...Xiaoliang Wang; Mi Zhou; Yinghui Tian _ A new design of geotextile sandbag embankment, named non-uniform geotextiles reinforcement, is proposed in this study. This proposed design optimizes the arrangement of geotextiles in the traditional design to increase the strength of the embankment base...

... parameters such as strength, stiffness, and coefficient of consolidation. The current evidence base is drawn from tests in which soil strength has been fully mobilized in each cycle of loading, whereas in practice, changes in stress around a geotechnical infrastructure typically occur only at a prefailure...

...Ralf Glienke; Mathias Schwarz; Carol Johnston; Melanie Hagemann; Marc Seidel _ The fatigue strength of structural steel bolts is significantly affected by variables introduced during manufacturing. These factors are generally inconsistent in the design codes, depending on the set of rules used...

... Sea, a corrosion prediction model is established. Ultimate strength under discrete stochastic extreme load events for the large floating structures is chosen as the time-dependent limit state. An effective method for time-variant reliability assessment subjected to corrosion deterioration...

... black sea specimen programme thickness requirement polar engineering turkstream pipeline geohazard strength International Journal of Offshore and Polar Engineering (ISSN 1053-5381) Copyright © by The International Society of Offshore and Polar Engineers Vol. 32, No. 3, September 2022, pp. 257...

...Konstantin A. Kornishin; Yaroslav O. Efimov; Petr A. Tarasov; Sergey M. Kovalev; Alexander T. Bekker; Alexander M. Polomoshnov The article investigates dependences of level ice strength properties in the Kara, Laptev, and East Siberian Seas on ice structure and physical parameters (primarily...

... documented and quali ed. dSpeci ed minimum yield stress. eSpeci ed minimum tensile strength. Table 1 Case matrix 3,500 m. The required wall thickness is calculated using the loadcontrolled local-buckling criterion that is de ned in DNVGL-STF101 (DNV GL, 2017); see also Eq. 1. The adopted design case for wall...

...M. E. Johnston Strength–temperature equations are presented for four categories of sea ice based on the borehole strengths (BHS) measured during 876 tests in 162 boreholes and their corresponding ice temperatures. The strength of every type of sea ice decreases with increasing ice temperature...

...Yufei Xiong; Deyu Wang An empirical formula for predicting the dynamic ultimate compressive strength of stiffened panels under longitudinal compressive load was proposed in this paper by curve fitting of massive nonlinear finite element (FE) analysis results. The formula was expressed in terms...

... temperature, salinity, and density decrease, but mean values of local strength and strength of ice samples at uniaxial compression increase. Failure zones of different intensity developed after the indenter penetration are studied. A range of comparison coefficients for local strength and uniaxial compression...

... water areas of the seas. 1 12 2019 1 12 2019 2019. The International Society of Offshore and Polar Engineers Upstream Oil & Gas total thickness ice ridge average value mironov strength porubaev Thickness sail height keel depth stamukha sea ice Laptev Sea ice...

...Jinju Cui; Deyu Wang; Ning Ma Considering usual computation efforts, single-frame models are used in the ultimate strength analyses of container ships. However, the case of large container ships is more complicated, and further investigations should be made. Generally speaking, the modeling extent...

... with the strain-softening model and the test results on monopiles under displacement-controlled repeated loading reveals that the accumulation of plastic strain leads to a reduction in the soil undrained shear strength and lateral stiffness. Further tests are conducted under load control. By interpreting...