...%, and 100% of the base material for the range: 500 ≤ D/t ≤ 2000. For two-layer domes (outer layer–steel, inner layer– auxetic), the best configurations of wall thickness are identified. This is an entirely numerical study based on the FE technology. INTRODUCTION Auxetic materials can be broadly divided...

... is vertically mounted at the bottom stern with 0 0 angles of attack (AoA). In this current study, a series of interceptor configurations considering negative and positive AoA has been done experimentally in Osaka University Towing Tank. The interceptor's mounted and divided into several locations...

... between a mooring buoy and the bed, with an inelastic cable installed between the mooring buoy and the M4 device. An improved mooring configuration using three solely elastic cables to a single buoy in pre-tension was investigated first, following modelling that suggested peak snap would be considerably...

... experiment configuration characteristic cross-section shape upstream oil & gas reservoir characterization inertia coefficient coverage ratio university equation numerical model marine fouling Proceedings of the Thirty-third (2023) International Ocean and Polar Engineering Conference Ottawa...

... handling). The other is for optimization of the jumper configuration. Except for the subsea the connected structures’ installation tolerances, and also there are several jumpers located around one structure (eg. manifold, SDU, SPLM) which demands the jumper's general layout limit to a small space...

...-section contact force stiffness cross section analysis social responsibility cable helical component configuration axial strain sustainability curvature cross section history dynamic cable geir skeie wind energy deformation complex cross-section proceedings expression evaluation...

... hydrodynamic characterization platform engineering remotely operated vehicle autonomous underwater vehicle configuration deep learning information artificial intelligence machine learning electrical industrial apparatus simulation auv simulator axis propeller real vehicle Proceedings...

.... No recommended turning abilities are specified for safe operation in the ice-covered regions. The required turning abilities of the arctic vessels have been decided based on the empirical practice of each ship operators. united states government configuration test method full scale approach model test...

... distributions are carried out. Following classical beam theories, a cross-section that is planar in the undeformed configuration is assumed to remain planar. Two procedures to find this plane are proposed. The cross-sectional deformations are discussed in the context of magnitude and qualitative distribution...

... meters deep. Moreover, the paper develops and implements an optimization framework for designing new FOWT configurations, regarding stability, and investigates the global response of the new design schemes. INTRODUCTION In recent decades, clean energy, especially wind energy, has been considered...

..., which acts as the speaker's membrane, radiating the noise in the surrounding environment. abh viscoelastic material configuration europe government cut-on frequency frequency noise vem application application thickness procedure flexural wave intensity canada government acoustic...

... ABSTRACT In this paper, the preliminary results of an experimental campaign aiming at investigating the wave forces on a composite vertical breakwater are presented. Specifically, the influence of the position of the wave wall are considered. Four different retreated wall configurations have...

... & gas united states government heat transfer frequency simulation gas monetization liquefied natural gas tank equation nusselt number cryogenic hydrogen displacement physics baeten boundary layer engineering integration scheme configuration liquid dependency pressure drop...

... the Volume of Fluid (VoF) method and the pressure-velocity equations are solved thanks to the PIMPLE algorithm. Different wave gauges and pressure probes are present in the experimental configuration that are used either as input parameters for our simulations and for the validation of our numerical results...

... are undertaken using towing tank model tests and CFD numerical simulations. Stern flap parameters are predicted by trial and error or from the inputs of previous successful installations. Since the traditional approach is time-consuming and costly, only a few design configurations can be evaluated. The best...

... ABSTRACT The objective of the present study is to investigate, by means of velocimetric measurements, the flow field generated by two marine propellers running with inclined shaft configuration. The two propellers represent two alternative designs for the same application, mostly differing...

... is required. artificial intelligence underwater robot autopilot automation module configuration cable electrical industrial apparatus base robot external module robot inspection sensor prototyping procedure port robot position autopilot external module computer specification...

... ABSTRACT The present work investigates the evolution process of beach nourished profile with a permeable submerged breakwater based on a physical experiment. A series of test cases with different configurations of the submerged breakwater in installation position, width and submerged depth...

... analysis artificial intelligence ship hull configuration convolutional 512 fem model vgg model grillage vgg-11 classification vibration mode recognition convolution filter zisserman Proceedings of the Thirty-second (2022) International Ocean and Polar Engineering Conference Shanghai, China...

... subsea system time history barge line tension wind energy turbine lthm system lthm configuration wf load engineering configuration history shallow water stiffness fowt frequency load mooring system wind turbine water depth offshore wind turbine lf load ABSTRACT...