... then physical testing can be conducted. enhanced recovery liner assessment polymer liner surfactant chemical flooding methods service environment material property immersion test fluid standardization upstream oil & gas international organization exposure tensile strain mechanical...

... properties have been manifested by composite polymer-containing coatings. exposure corrosion rate coating subsurface corrosion gnedenkov 1 defect zone friction coefficient flowline corrosion metals & mining composite polymer-containing coating immersion alloy materials and corrosion...

... after 8 days immersion with formation of protective Crhydroxide. In the corrosion product scale, the inner layer is composed of Cr-hydroxide and MnCO 3 , while the outer layer is composed of FeS and Cr-hydroxide. This dual layer is responsible for increase in the corrosion resistance of high Mn steel...

... Abstract To ensure that the tunnel elements can be immersed and landed safely and accurately, an experimental study with scale model tests was performed to investigate the dynamic responses of the immersing tunnel element under random waves. The experimental measurements revealed...

... (Set); ISSN 1098-6189 (Set); www.isope.org 218 3cm x 2cm, and connected to copper wire to a hole at the center of the edge. The surface was then insulated with an epoxy leaving a 1cm2 area uncoated for the corrosion test. After all test specimens were immersed in a sea water solution...

... the hydrodynamic loads of regular, non-breaking waves on a 1 foot (0.305 m) square plate and a 19 inch (0.483 m) diameter cylinder, and discuss the results from this effort. The loads were recorded while varying incident wave height, wavelength, wave steepness, plate angle and immersion level of the plate/cylinder...

... shape factor equation dutta deionized water immersion strength variation deterioration specimen durability reliability characteristic retention weibull shape factor rehabilitation moisture uptake Reliability and Durability of Polymer Matrix Composites Used in Renewal of Offshore...

... that could include severe changes in temperature, splash, changes in humidity (or level of immersion), and exposure to salt and alkaline solutions. In addition, these materials are formed on concrete substrates that may not be completely dry and may in fact have significant concentration of chlorides...

... Immersive Visualization Environments (CIVE) provide mechanisms to share theses expertise and information. So, oil companies are now adopting CIVE as the new productive generation tools to analyze exploration and production data. There are several solutions at this marketplace. This paper brings a discussion...

.... Boats, swimming pools and water reservoirs are prone to this phenomenon, with consequences from simple cosmetic damage to structural failure. In marine applications, weight gain is also a problem. composition weight gain immersion coefficient gelcoat molecule glass flake reference...

... at the cable extremities, body immersion, cable slopes, angular displacements and rates of the immersed body) in order to validate software of simulation of the three- dimensionnal unsteady behaviour of a towed system composed of a cable towing an immersed body. The second objective was to use the acceleration...

... of Rankine sources. Both free-stream and double-body linearizations are tested for 2D flows due to moving sources and to moving dipoles. boundary condition intensity approximation rankine source method immersion wave elevation linearization double-body linearization parabolic spline hull...

... as on the coating surface. Adhesion force of coating to substrate decreased significantly after immersion in seawater. Corrosion products and calcareous deposits were found to cause the blistering of metallic coatings. INTRODUCTION Metallic coatings applied by the thermal spraying are frequently used...