... of computing position equation stiffness coefficient cavitation pressure strength engineering fluid-structure interaction interface schiffer interface mpa coefficient underwater explosion fluid dynamics study intensity time tagarielli evolution Proceedings of the Thirty-fourth (2024...

... structure technology hull floating production systems roller mpa software consideration subsea system calculation construction foundation patran nastran Proceedings of the Thirty-fourth (2024) International Ocean and Polar Engineering Conference Rhodes, Greece, June 16 21, 2024 Copyright ©...

... ABSTRACT The required thickness of a large aboveground liquefied hydrogen tank was estimated for SUS304L and high-Ni steel. For a 230,000 m 3 tank with atmospheric insulation and 0.2 MPa internal hydrogen gas pressure, the required plate thickness was 47 mm for SUS304L and 28 mm for high-Ni...

... cement chemistry casing and cementing rock type cement property cement slurry mpa mudstone united states mudrock cement formulation requirement clastic rock complex reservoir shale gas resistance diameter operation permeability density longmaxi formation china application reducer...

... korea ministry geology subsea system platform mooring system geological subdiscipline multi-body solar platform lives hydro-dynamic behavior safety criteria mpa geologist reservoir geomechanics rao criteria shell connector design capacity byoung wan kim engineering ocean engineering...

... and corrosion specimen geologist seawater pipeline corrosion h2s management production chemistry flowline corrosion alloy investigation loading corrosive media bertoglio strength composition propeller bronze alloy amplitude mpa aluminum bronze alloy microstructure bronze thickness ship...

... was used to study the key technical parameters of subsea HIPPS application and optimize the testing and pressure relief process. The results show that setting two layers of mutually independent overpressure protection system for anomalous high pressure wells, with 21.9 MPa shut-off pressure...

... parameter symbol type 1 collapse testing data mining dnv model specimen strength mpa model uncertainty dnv-st-f101 Proceedings of the Thirty-third (2023) International Ocean and Polar Engineering Conference Ottawa, Canada, June 19-23, 2023 Copyright © 2023 by the International Society of Offshore...

... system strength ultra-low density cement slurry system upstream oil & gas resistance slurry china government cement slurry requirement mpa ABSTRACT With the development of petroleum exploration and development to the deep land and ocean, the contradiction between low pressure...

... system has the advantages of rapid development of low temperature strength (strength development at 52 °C for 6 hours), good comprehensive performance (meet the requirements of field cementing construction), excellent mechanical properties (compressive strength 33.27 MPa and Young's modulus 5.65 GPa...

... loss control drilling fluid property cement formulation displacement rate pipe string eccentricity friction mpa overflow strength Proceedings of the Thirty-third (2023) International Ocean and Polar Engineering Conference Ottawa, Canada, June 19-23, 2023 Copyright © 2023...

... reached 3.7 MPa at −5 °C for 24 h, meeting the technical requirements of cement slurry in polar alpine region. INTRODUCTION The Arctic region has 900×10 8 bbl of undiscovered oil and more than 47×10 12 m 3 of undiscovered natural gas, accounting for 13 % and 30 % of the world's unproven oil...

... ABSTRACT This study evaluates the suitability of using high-strength 15% Ni steel in large liquefied hydrogen tanks. The allowable stress of the 15% Ni steel was 230 MPa based on the International Maritime Organization (IMO) Type C formula, which was 1.68 times higher than that of SUS304L...

... asia government south korea government case 1 optimization artificial intelligence case 4 case 2 marine transportation freight & logistics services mpa car deck passenger transportation ship case 3 ro-ro ship normal stress topology optimization car deck structure hinge...

..., it would be possible to remove adherent organisms before they become attached to the ship's bottom and always maintain a smooth ship bottom. shock wave nozzle outlet flow field frequency water management orifice bubble motion mpa marine transportation high-luminance area orifice plate...

... direction mpa low-cycle fatigue crack growth multiaxial low-cycle fatigue crack growth cumulative plastic strain ABSTRACT In this paper, multiaxial non-proportional low-cycle fatigue crack propagation of hull crack plate are studied under the loading paths with the different phase differences...

... is determinate. However, this procedure leads to overfitting and causes severe numerical instability, and there is no rationale to determine the EDS at the crack mouth. surface crack relation mpa target crack quadrature semi-circular surface crack loading weight function reference solution...

... TW (Drew et al., 2016). sustainable development condition 1 stress peak platform float arm constant-section float arm deflection stress distribution sustainability ocean energy wave force mpa wave energy converter social responsibility high-performance float arm horizontal...

.... The experimental results show that the overall device test meets the design requirements, the maximum test pressure is 20 MPa. The sweep of the temperature field displayed by the experimental data acquisition device is basically consistent with that of the actual visual observation. Using the design concept...

... cement chemistry shallow formation consolidated shallow formation upstream oil & gas cement property compressive strength mpa dosage cement-formation interface strength building material casing and cementing strength simulation core weakly consolidated shallow formation...