... algorithm measurement parameter angle measurement equation measurement accuracy superresolution correction month 2025 correction algorithm Journal of Ship Production and Design, Vol. 00, No. 00, Month 2025, pp. 1 13 httpdx.doi.org/10.5957/JSPD.09240025 Real-time Measurement of Sheet Metal Bending...

... the free surface is called the splash zone, and the part that is submerged under the free surface is called the submerged zone. When waves are only present, they are considered only in the splash zone, and when waves and currents are included, equations were derived for both the splash zone...

... Copyright 2024, The Society of Naval Architects and Marine Engineers floating production systems journal flng module subsea system month 2024 operation liquified natural gas (lng) equation tank riser technology conference tilt turbine matrix harsh environmental condition configuration...

... 30 10 2023 9 2 2024 12 3 2024 30 11 2024 Copyright 2024, The Society of Naval Architects and Marine Engineers second generation intact stability criteria international maritime organization assessment equation level 2 tug boat draft guideline dead ship condition...

... and design equation Journal of Ship Production and Design, Vol. 40, No. 3, August 2024, pp. 133 144 httpdx.doi.org/10.5957/JSPD.11230031 A Methodology for Ship Cabin Equipment Layout Considering Human Factor Reliability Optimization Qiaoyu Zhang,* Hongshuo Zhang,* Yan Lin,* Yuansong Yang, and Haiyang...

... utilized CFD analysis for PBCFs optimization. Optimized PBCFs provide savings on both cost and energy ef ciency by 1.3% ef ciency. Gaggero (2018) has also optimized PBCF devices by CFDs analyses based on the Reynolds-averaged Navier Stokes (RANS) equations. The utilization of PBCFs of the KP505 propeller...

... equation Journal of Ship Production and Design, Vol. 39, No. 4, November 2023, pp. 177 187 httpdx.doi.org/10.5957/JSPD.09230024 Journal of Ship Production and Design Derivation of Optimum Outfit Density for Surface Warships based on the Analysis of Variations in Work Content and Workforce Density...

... of the power speed ratio (MrpCmR) in the form of a simple linear equation, y ¼ m à x þ c. Also, in this study, diesel engines and turbine machinery were considered to formulate the equation for the estimation of engine weight. Surprisingly, the maximum power shown was only 15,000 SHP, on that date, installed...

... ship journal ship production and design diesel engine ship production regulation imo climate change environment co 2 month 2023 methanol engineering equation reduction asia government fuel saudi arabia government Journal of Ship Production and Design, Vol. 39, No. 3, August 2023, pp...

... of the design problem (for each alternative and scenario) described above is to minimize the total capacity of the drainage pumps and, accordingly, the minimum number of pumps, as shown by equation (1). Here, PC denotes the selected pump capacity, and Zi denotes the number of pumps placed in each compartment...

... production. shipbuilding canada government budget documentation risk management expenditure marine transportation europe government shipyard equation journal relation university quantity design shipbuilding decision-making optimization austria government month 2023 shipbuilding decision...

... JOURNAL OF SHIP PRODUCTION AND DESIGN 101 Table 1 The ratio of the ultimate shear strength (sUlt sy ) of an intact plate Plate aspect ratio, a b Method 12345 Current study .858 .852 .839 .855 .881 Equation (4) (Paik et al. 2004) .821 .934 .956 .956 .956 de ned as follows: fcrack ¼ 8 X0BBB@ 1Àni:¼0010@BB0B...

... of curved hull plates in the shipbuilding eld. Lee et al. (2020) proposed an equation through nonlinear regression, which estimated the cycle-times for forming per unit area of the curved hull plates by the line heating method. However, the number of curved hull plate datasets used in this study was insuf...

... of the Froude Krylov and hydrostatic pressure over exact wetted surface as well as retaining the quadratic terms in the unsteady Bernoulli equation. The nonlinear effects associated with viscous damping will be important in all three restored modes, which requires the implementation of nonlinear damping in all...

...), which are indicators of stability. The remainder of the paper is organized as follows. In Section 2.2, the dynamic ori ce equation, which can be used to estimate the uid ow, is considered. In Section 2.3, the calculation of air pressure in fully ooded compartments is described. In Section 2.4...

... will be observed, and the state transition of the unit in time T is shown in Fig. 1. t¼2 t¼1 As shown in Fig. 1, the state prediction sequence of the evaluation In order to obtain the maximum value of gQðoÞ, logarithmic change of equation (13) is as follows: object can be described as the transfer path...

... selected as the design variables in this study along with some constraints. To estimate the optimal plate thickness, an expression of stress equations was developed using an optimization technique. Furthermore, stiffener shape and plate material type selection were optimized using a genetic algorithm (GA...

.... In this article, a detailed pro- eral methods and techniques (Baroni et al. 2016). cedure of a CFD simulation using Reynolds-averaged Navier-Stokes equation (RANSE) technique based on moving reference frame In addition to experimental testing, there are additional methods (MRF) approach is proposed to solve...

... and Marine Engineers tensile plastic zone circumferential horizontal brace subsea system ffiffiffi 2 yield stress plastic zone compressive plastic zone appearance semi boundary condition ship production equation ctod elastic-plastic analytical solution august 2021 Journal of Ship...

... stiffener type ultimate strength iacs-csr requirement load-carrying capacity plate slenderness compression equation stiffened panel Journal of Ship Production and Design, Vol. 37, No. 2, May 2021, pp. 117 129 httpdx.doi.org/10.5957/JSPD.08190050 Empirical Assessment Method of Ultimate Capability...