Skip Nav Destination
Proceedings Papers
All Days
The Role Of Coatings In The Generation Of High-And Near-Neutral Ph Environments That Promote Environmentally Assisted Cracking
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Ballast Water Tank Coatings for the Future
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Antifouling Coatings For Offshore Structures
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Effect Of Retaining Preconstruction Primer (Pcp) On The Quality Of High Performance Protective Coatings Systems
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Qualification Of Thermal Insulation For Subsea Reeled Flowlines With A Design Temperature Of 155 Oc.
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Practicabilities Of Low Temperature Curing System On Offshore Structures
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Polysiloxane Topcoats - A Step Too Far?
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
An Overview of Weatherable Finishes
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Coatings For Offshore Applications By High Velocity Wire Flame Spraying
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Stress Analysis And Evaluation Of Cracks Developed On The Coatings For Welded Joints Of Water Ballast Tanks
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
A Critical Study on Edge Retention of Protective Coatings for a Ship Hull
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Evaluation Of Various Power Tooling Methods For Surface Treatment Of Protective Coating
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Innovative Solutions To Surface Preparation In Restricted Areas
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Study of Scratch Behavior of Epoxy Acrylate Coatings Based on Progressive Load Test
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Development & Testing Of New Generation High Temperature Corrosion Resistant Coatings
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
A Critical Review Of Current Performance Tests For Offshore Anti-Corrosive Coatings
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Barrier Properties Of Two Pipeline Coatings
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Development of a New Range of FBE Coatings
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Practical Analysis of Cathodic Disbondment Test Methods
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Testing And Selection Of Girth Weld Protective Coatings
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Fitness For Purpose Issues Relating To Fbe And Three Layer Pe Coatings
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Life-Cycle Cost Comparisons of Corrosion Protection Methods for Ductile Iron Pipe
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Ductile Iron Pipe Case Study: Corrosion Control Performance Monitoring In A Severely Corrosive Tidal Muck
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Field Tests On An Advanced Cathodic Protection Coupon
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
A New Permanent Reference Electrode for Field Use with Cathodic Protection in Protection of Underground Pipelines and Storage Tanks
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Field Test Results Of Cp Coupons For Remote Cp Monitoring
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Remote Monitoring Units (Rmu) For Cathodic Protection
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Assesment Of Cathodic Protection System Performance For New Storage Tank Bottoms Using Long Line Polymeric Anodes
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Resistance of Impressed Current Parallel Grid and Concentric Circular Ribbon Anode Beds Underneath Tank Bottoms
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Cathodic Protection Of Water Transmission Pipelines
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Cathodic Protection Of Piping Network In Congested Areas Of A Petrochemical Plant
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Study Of Parameters Of Design Of Cathodic Protection In Submerged Pipes In Maracaibo Lake Using Different Coatings
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Prediction Of Corrosion Of Nickel-Base Alloys And Stainless Steels In Oxidizing Environments Using Thermodynamic And Electrochemical Models
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Automating Evaluation And Selection Of Corrosion Resistant Alloys For Oil And Gas Production And Transmission
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Modelling Corrosion Kinetics And Electrochemical Techniques With Spreadsheet Tools
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Modeling Of Image Formation And Image Enhancement For Scanning Electrochemical Methods
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
A Stochastic Prediction Model of Localized CO2 Corrosion
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Corrosion Management For Quality Control And Assurance
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Easily Accessible Intelligent Corrosion Tools On The Internet
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Understanding Scaling Indices And Calculating Inhibitor Dosages
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Natural Odor Control Using Activated Humates And Microbiological Augmentation
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Case Studies In Closed System Failures
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Emerging Corrosion Prevention And Control Technologies For Wastewater Treatment Plants
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Problems In Cooling Water Systems Caused By Poor Design, Operation And Water Treatment- Some Case Histories
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Novel Software To Predict Corrosion And Scaling Tendencies In Industrial Boilers
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
A Predictive Tool For Monitoring, Diagnosing And Treating Heat Exchanger Fouling
Vijaysai Prasad; Mark Osborn; Shirley S. Au; Sunil S. Shah; Nishith P. Vora; Alan B. Carlisle; Charles R. Ascolese
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Anode Array Resistance Determination For Cathodic Protection Of Marine Structures And Pipelines
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Retrofit Cathodic Protection Design For Depolarized And Partially Depolarized Structure
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Correlation Efficiency Of Sacrificial Anode Al-Zn-In Toward Movement Of Polarization Curve Using Potentiodynamic Method
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Electrochemical Characteristics Of Ai-Zn-Mg Alloys As Sacrificial Anodes In Sea Water
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Anodes
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Wear and Corrosion Resistant Alloys for Oil Drilling and Refineries
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Sulfide Stress Cracking And Corrosion Fatigue Of Steels Dedicated To Bottom Hole Assembly Components
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Tension And Dcb Tests In Modified Nace Environment
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Assessment of the Effect of Different Test Variables on the Measured KISSC Value
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Ssc Resistance Of A 125 Ksi Steel Grade In Slightly Sour Environments.
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Development Of 125ksi Grade Hsla Steel Octg For Mildly Sour Environments
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Production And Fit For Service Attributes Of C125 High Strength Casing
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Application Limits for Super Martensitic and Precipitation Hardened Stainless Steel Bar-Stock Materials
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Experience With 13cr Supermartensitic Stainless Steel In The Tune Submarine Flowlines
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Effect Of Pwht Temperature On Scc Behavior Of Low C-13 % Cr Steels Weld Joints In Hot Acidic Production Environments
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Effects of Thermal Cycle Conditions on Intergranular Stress Corrosion Cracking in Sweet Environment for Supermartensitic Stainless Steel
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Failure Of A 15 Percent Chromium Martensitic Stainless Steel Production Tubing Coupling -Results of a Failure Analysis and a Laboratory Study
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Robustness Of Supermartensitic Stainless Steel Girth Welds ? Experiences From The Kristin Field Development Project
Jakob Enerhaug; Stien Olsen; Gisle Rorvick; Trond Rogne; Andre Mikkelsen; Per Arne Rostadsabd; Tore Haabrekke
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
A Review On Hydrogen Embrittlement Of Duplex Stainless Steels
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Comparison Of Corrosion Resistance Of Nickel-Base Alloys For Octg's And Mechanical Tubing In Severe Sour Service Conditions
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Laboratory Testing Of Age-Hardenable Alloys Environments 925 And 718 In Sour Gas
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Mechanical And Corrosion Performance Of Welded Alloy 925 Vit In Sour Environment
Dong S. Kim; Brian A. Baker; Sarwan K. Mannan; Edward L. Hibner; Brett C. Puckett; Tim Brunson; Steven S. Shademan; Lillian Scogsberg
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Materials And Corrosion Challenges With Raw Seawater Injection
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
A New Precipitation Hardenable Alloy For Sour Service Oilfield Environments
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Development Of New 15cr Stainless Steel Octg With Superior Corrosion Resistance
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Serviceability Of Coiled Tubing In Corrosive Workover And Production Environments
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Development Of High Strength Hot Rolled Steel Strip For Sour Service
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Materials Optimisation In Hydrocarbon Production
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Sscc Failure In Well Ful-19l Furrial Field North West Venezuela Symposia 05-Stg-32 (1)
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Cost-Benefit Analysis Of Flowline Replacement For A Major Middle East Oil Producer
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Localized Corrosion Resulting From Inhibition In Oil And Gas Production Environments Containing Acetate
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Bad Practices In Drilling Operation Promoting Corrosion Failures Under High Stress
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
The Effect Of Strain On The Suspectability Of Pipeline Girth To Sulfide And Stress Cracking
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Performance Of Grade X65 To X100 Large-Diameter Pipes Under Various Hydrogen Charging Conditions
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Investigation Of The Effects Of Multiphase Fluid Parameters On Corrosion Currents In Rotating Disc Crevices
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Effect Of Metallurgical Factors On Expandability And Mechanical Properties After Expansion For Expandable Tubulars
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Solid Expandable Technology ? Testing and Application
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
The Use Of Slotted Expandable Technology For Sand Control Applications
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Corrosion Resistance and Predicted Fitness for Use .of Expandable Pipe Manufactured from Super-Austenitic Alloy 27-7MO
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Pipeline Corrosion From Induced A.C.
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Electrochemical Corrosion Rate Sensors For Detecting Internal Corrosion Of Natural Gas Transmission Pipelines
Brenard S. Covino; Steven D. Cramer; Sophie J. Bullard; Gordon R. Holcomb; Malgorzata Ziomek Moroz; Russell D. Kane; Dawn C. Eden
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Monitoring Pipeline Integrity Using Fiber Optic Sensors
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
CP Data Management Software, Field Computers And Remote Monitoring Facilitate Cathodic Protection System Commissioning
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
A Technique For The Assessment Of Pipeline Internal Corrosion By The Measurement Of Cleaning Pig Vibration
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Modeling Pipeline Corrosion Within A Disc-Shaped Crevice For Various Cathodic Protection Levels At The Holiday And The Effect Of Crevice Geometry
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Factors Affecting The Rate And Extent Of Disbondment Of Fbe Coatings
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Performance of Pipeline Composite Repair Sleeves
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Life Extension Of Degraded Main Oil Line Pipeline Sections Through Improved Risk Based Integrity Management
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Corrosion Rate Monitoring In District Heating Systems
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Hydrogen Embrittlement Of Prestressed Concrete Cylinder Pipes
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Pipeline Internal Corrosion Control Using Inhibition
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
A Structural Reliability Based Assessment Of Non-Piggable Pipelines
Menno T. van Os; Giorgio G.J. Achterbosch; Gererd A.J. Stallenberg; Piet Van Mastrigt; Henk Horstink; A.M. Dam
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Riser Inspection and Remediation in West Africa
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Determining Corrosion Growth Accurately and Reliably
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Critical Review: Fad Assessment Methods For Crack-Like Flaws In Pipelines
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Using Cost Effective Magnetic Flux Leakage Inspections As An Scc Screening Tool
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Progressive Integrity Assessment Solutions Using Quantitative Methods
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Combined Fracture Mechanics And Crack Detection Methodology For Scc Screening
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
The Mechanism Of Near Neutral Ph Scc
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Advantages Of High Resolution Ultrasonic In-Line Inspection Tools Regarding Run Comparisons And Integrity Assessment Of Pipelines
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Predictive Internal Corrosion Monitoring on a Crude Oil Pipeline: A Case Study
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Assessment of ILI Tool Performance
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
External Corrosion Risk Management For Aged Steel Pipelines Buried In High Consequence Areas
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
A Pilot Application Of Ecda To A Liquid Co2 Pipeline
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Advanced Icda: A Methodology For Quantifying And Mitigating Potential For Corrosion Damage In Pipelines
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
ECDA Workflow Optimization Utilizing Software Tools
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Internal Corrosion Direct Assessment: Refining The Method Through New Decision Support Models
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
A Comprehensive Model for Predicting CO2 Corrosion in Oil and Gas Systems
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Practical Experiences In Validating The Ecda Process ? Comparing Indirect Inspection Results And Direct Examinations
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Prioritization of Detailed Examination Sites in Dry Gas Internal Corrosion Direct Assessment Using a Probabilistic Method
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Results From An Ecda Plan
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Where to Dig
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Role of Alkalization in AC Induced Corrosion of Pipelines and Consequences Hereof in Relation to CP Requirements
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Influence of AC on Corrosion Kinetics for Carbon Steel, Zinc and Copper
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Stress Corrosion Cracking and Corrosion Susceptibility of Duplex Stainless Steels in Caustic Solutions
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Fireside Corrosion of Carbon Steel Tubes in Kraft Recovery Boiler Mid-Furnace
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Update of Anodic Protection Systems in Continuous Digesters Worldwide
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Corrosion and Cracking of Bottom Scrapers in Continuous Digesters
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Impact of Southwest Asia Environment on Air Force Aircraft and Support Equipment
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Wicking and Water Displacement by Corrosion Prevention Compounds in Simulated Aircraft Aluminum Alloy Lap Joints
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Corrosion Protection and Health Monitoring by Smart Appliques
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Effect of Commercial Rust Converter Coatings on the Environmentally Assisted Cracking Resistance of HY-100 Steels and High Strength Alloy Steel Fasteners
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Study on Corrosion Resistance of Electroless Plating Ni-P Complex Coating
Huang Yan- Bin; Wu Chun- Sheng; Liu De-Gang; Liang Zhi- Jie; Shi Xiao- Jun; Zhang Qi- Yong; Lu Ya- Hui
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
An Evaluation of Sacrificial Metallic Coatings for Service Life Extension of U.S. Army Vehicles
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Research of New Anti-Corrosion Coating for Equipment in Littoral
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Formulation of a Joint Test Protocol for the Corrosion Assessment of Magnesium Components on Military Assets
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Perceptions, Realities, and Progress in Army Aviation Corrosion Issues
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Behavior of Galvanized Steel in Tropical Marine Environments
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Evaluation of Deoxygenation for Corrosion Control Measure for Ballast Tanks
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Testing Issues for Coatings for In-Service Marine Immersion Applications
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Accelerated Low Water Corrosion Of Steel Pilings In Seawater
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Application of Copper-Nickel Alloy UNS C70600 for Seawater Service
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Factors Affecting Corrosion Performance and Testing of Materials and Components in Sea Water
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Corrosion Problems in Concrete Reinforced Basements Exposed to Chloride Contaminated Waters
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
A New Generation of High Strength, Corrosion Resistant Superalloy Products for Military Springs, Fasteners and Hardware
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Qualification Testing of Superduplex Stainless Steel Tubing for Umbilicals
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Internal Corrosion of Aluminum Compressed Air Cylinder
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Corrosion Protection of Carbon Steel in Natural Sea Water, Using New 4 Phosphonopiperazione-1-yl Phosphonic Acid Inhibitor
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Results of Various Corrosion and Mechanical Tests on Cold Reduced Bars of Alloy 59, UNS NO6059, for Fastener Applications
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Corrosion Resistance of UNS NO4400 vs. Electroless Nickel in Simulated Marine Service
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
A Study of the Effects of Microstructure on the Sea Water Jet Impingement Resistance of Nickel Aluminum Bronze
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
The Asperida - A Copper Nickel Sailboat after More Than Thirty Years in Seawater
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Review of N08367 Sea Water Service Experience
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Considerations and Criteria for Relocating Utilities in Electric Rail Corridors
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Cathodic Protection Design Considerations for Waterlines Impacted by Light Rail Construction
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Track-to-Earth Resistance, What Does it Mean?
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Dynamic Stray Current Analysis for New DC Powered Transit Systems
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Stray Current Control for Steel Reinforced Concrete Light Rail Bridges
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Quantifying LRT Stray Current Effects Using Coupons
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Stray Current Testing on a Gas Distribution Piping Following Start-up of a New Light Rail Transit Line
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Parametric Stray Current Monitoring and Mitigation for Electric Rail Stray Current
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Long-Term Behavior of Fly Ash and Silica Fume Concretes in Laboratory and Field Exposures to Chlorides
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
A Web Based Tool for Selecting Repair Options and Life Cycle Costing of Corrosion Damaged Reinforced Concrete Structures
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Time-to-Corrosion of Reinforcing Steel in Concrete Specimens as Affected by Cement Alkalinity and Bar Surface Condition
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Effects of Relative Humidity and Temperature on Chloride Diffusion and Time-to- Corrosion of Reinforcing Steel in Concrete
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Performance of Corrosion Resistant Reinforcement as Assessed by Accelerated Testing and Long Term Exposure in Chloride Contaminated Concrete
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Threshold Chloride Concentrations of Selected Corrosion Resistant Rebar Materials Compared to Carbon Steel
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Corrosion Properties of S32101 - A New Duplex Stainless Steel, with Low Nickel Content for Use as Reinforcement in Concrete
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Resistivity Measurements of Water Saturated Concrete as an Indicator of Permeability
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Performance of Galvanized Reinforcing Steel in Carbonated Concrete Specimens
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Carbonation Induced Corrosion in Urban Concrete Structures
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Long Term Performance of Galvanized Reinforcing Steel in Concrete Bridges - Case Studies
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Laboratory Test Results on Corrosion Inhibitors for Reinforced Concrete
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Corrosion of the Strand - Anchorage System in Post-Tensioned Grouted Assemblies
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Real-Time Monitoring of Corrosion in Concrete, Utilizing Coupled Multielectrode Array Sensors
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Nopal and Aloe Vera Additions in Concrete: Electrochemical Behavior of the Reinforcing Steel
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Why So Low Free Acetic Acid Thresholds, in Sweet Corrosion at Low PCO2?
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
A New Multichannel Ultrasonic System For Subsea Corrosion And Erosion Monitoring
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Effects of Sand and Interfacial Adsorption Loss on Corrosion Inhibitor Efficiency
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Preferential Weld Corrosion of 1% Ni Welds: Effects of Solution Conductivity and Corrosion Inhibitors
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Corrosion Loop Studies of Preferential Weld Corrosion and Its Inhibition in CO2 Environments
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Preferential Weld Corrosion: Effects of Weldment Microstructure and Composition
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Effect of Acetic Acid, pH and MEG on the CO2 Top of the Line Corrosion
Concepcion Mendez; Marc Singer; Alvaro Comacho; Srdjan Nesic; Sandra Hernandez; Yuhua Sun; Yves Gunaltun; Michael W. Joosten
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
The Synergistic/Antagonistic Effect of Water Treatment Chemicals on Corrosion Inhibition of Carbon Steel in the Water Injection System of West Kuwait Oil Fields
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
The Design and Synthesis of Improved Corrosion Inhibitors
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Integral Study of the Internal Corrosion in the Managing of Crude Oil with Low Water Cut in the Production Lines
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Evaluation of Inhibitors for their Mitigating Benefits Against Acid Gas Corrosion on Laboratory Tests Simulating CO2 Flood Oil Production Environments
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Iron Carbonate Scale Growth and the Effect of Inhibition in CO2 Corrosion of Mild Steel
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Laboratory Evaluation Study of Continuous Corrosion Inhibitors for West Kuwait Oil Fields Injection System
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Corrosion Inhibition in Oil Production of Mature Reservoirs
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Test Methodologies and Field Verification of Corrosion Inhibitors to Address under Deposit Corrosion in Oil and Gas Production Systems
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Control of Localized Corrosion using Green Corrosion Inhibitors
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Development of Corrosion Inhibitors to Address under Deposit Corrosion in Oil and Gas Production Systems
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Erosion Corrosion Phenomena of 13Cr at Low Sand Rate Levels
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Further Advances in the Development of Erosion Corrosion Inhibitors
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Real-Time Monitoring of Carbon Steel Corrosion in Crude Oil and Brine Mixtures using Coupled Multielectrode Sensors
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Iron Carbonate Scale Formation and CO2 Corrosion in the Presence of Acetic Acid
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Mechanism of FeCO3 Formation on API X70 Pipeline Steel in Brine Solutions Containing CO2
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
H2S Corrosion of Carbon Steel under Simulated Kashagan Field Conditions
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
A Comparison of the Corrosion of Carbon and 13% Chromium Steels in Oilfield Brines Containing Acetate
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
In Search of the Driving Corrosion Mechanisms in a Mail Oil Line System
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
The Effect of O2 on CO2 Corrosion in pH Stabilized Gas/Condensate Pipelines
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
The Effect of Acetic Acid and Acetate on CO2 Corrosion of Carbon Steel
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Comparison of the Effects of Air, Carbon Dioxide and Hydrogen Sulphide on Corrosion of a Low Carbon Steel under Water and Its Inhibition by a Quaternary Ammonium Salt
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Field Investigation of Various Weld Overlays in a Waste Incineration Plant
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Filler Metal 50 as a Weld Overlay in Waste Incineration Applications
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Selecting Materials of Construction for Incinerator Wet Scrubbers
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Materials Performance in High Temperature Black Liquor Gasification
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Corrosion Resistance of the Ni-Cr-Mo-Ta Alloy (UNS NO6210) in Waste Treatment Facility Simulated Environment Solutions
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Corrosion Resistance of Duplex and Super Duplex Stainless Steels for Air Pollution Control Process Systems
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Fireside Corrosion Management in RDF Waste-To-Energy Boilers
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Modeling Corrosion in Biomass-Fired Power Plants
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Effects of Exposure Conditions Upon Corrosion by HCl and Cl2 Gases
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Evaluation of Performance of Vapor Phase Inhibitors (VPI) by Different Techniques
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
A Preliminary Model for Correlation of Plasmon Resonance Spectra with Adherence Properties of Corrosion Inhibitors
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Vapor Corrosion Inhibitors in Lubricants
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Vapor Phase Inhibitors To Extend The Life Of Aging Aircraft
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Electrochemical Evaluations of High Shear Corrosion Inhibitors, Using Jet Impingement Equipment
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Influence of Cement Type and Temperature on the Rate of Corrosion of Steel in Concrete Exposed to Carbonation
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Electrochemical Behavior of Nickel Alloys in HCl Solutions Containing Oxidizing Impurities
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Practical Measurements Using Non-Linear Analysis Techniques ? Harmonic Distortion and Intermodulation Distortion
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
In-Situ Study of High Temperature Aqueous Corrosion by Electrochemical Techniques
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Direct Assessment of Localized Corrosion Using Localized Corrosion Monitoring Technique
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Fundamental Issues in the Application of Electrochemical Impedance Spectroscopy
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Fluid Mechanical Interactions of Turbulent Flowing Liquids with the Wall - Revisited with a New Electrochemical Tool
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Rapid Determination of Tafel Slopes by an Integral Method of Coulostatically Induced Transients
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
When Can Electrochemical Techniques Give Reliable Corrosion Rates on Carbon Steel in Sulfide Media?
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Corrosion of Aluminized Steel in Scale Forming Waters
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
A New Technique for the Characterization of High Impedance Coatings
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Electrochemical Noise - the Third Octave
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Preprocessing Requirements for the Analysis of Electrochemical Noise Data in the Time Domain
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Wavelet Analysis of Electrochemical Noise Data
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Electrochemical Noise Monitoring of Corrosion in Natural Gas Production Plants
Sophie J. Bullard; Bernard S. Covino, Jr.; Stephen D. Cramer; Gordon R. Holcomb; Malgorzata Ziomek- Moroz; Brian Meidinger; Russell D. Kane; Dawn C. Eden
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Electrical Resistance Measurements on Paint Coatings
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
The Application of Electrochemical Noise Based Corrosion Monitoring to Nuclear Waste Tank Vapor Space Environments at the Hanford Site
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Corrosion Monitoring by Electrochemical Noise Probes in a Purified Teraphthalic Acid Production Plant
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Application of Electrochemical Noise Measurements for Salt-Spray Testing
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Electrochemical Noise as a Tool to Characterize the Functional Surface Properties of Stainless Steels
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
The Use of Electrochemical Noise to Detect Initiation of Stress Corrosion Cracking
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Application of Electrochemical Noise Technique in Multiphase Flow
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Electrochemical Noise Analysis of Tribo-Corrosion Processes under Steady-State Friction Regime
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Electrochemical Noise Analysis in a Frequency Domain of AZ91D and ZXJ530 Magnesium Alloys in Chloride Solutions
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Laboratory Evaluation of a Multi-Array Sensor for Detection of Underdeposit Corrosion and/or Microbiologically Influenced Corrosion
Michael H. Dorsey; Daniel R. Demarco; George A. Fisher; Brian John Saldanha; Lietai Yang; Narasi Sridhar
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Novel Multi Reference Electrode For Localized Corrosion Monitoring Of Steel Reinforcement In Concrete
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Single Electrode Probes for On-Line Electrochemical Monitoring
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Making Sense of Sensors - Electrochemical Monitoring in Difficult Environments
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Sensor Technology for On-Line Monitoring of AC Induced Corrosion Along Pipelines
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Remote Corrosion Monitoring System for Buried Pipeline using Trunked Radio System and Permanent Reference Electrode
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Advanced Corrosion Control in Chemical Plants using a New Corrosion Monitoring Technique
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
An Improved Method for Real-Time and Online Corrosion Monitoring, Using Coupled Multielectrode Array Sensors
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Real-Time Monitoring of Corrosion in Soil Utilizing Coupled Multielectrode Array Sensors
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Bimetallic ECN Sensor for Monitoring Inhibitor Efficiency in Waterbased Hydraulic Fluids
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
A Galvanic Sensor for Monitoring the Corrosion Damage of Buried Pipelines: Part 3: Electrochemical Tests to Determine the Correlation of Probe Current to Internal Corrosion Damage in Synthetic Tap Water
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Resin Based Linings vs. Rubber Linings in FGD Scrubber Heads
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Corrosion Due to Process Instability in a Hot Lean Amine System
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
A Risk Based Analysis Method for Corrosion Control Applied to an Amine Gas Sweetening Plant
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
A Review of Current and Past Reference Electrode Technology for Use in High Subcritical and Supercritical Aqueous Systems
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Corrosion Behavior of NF616 and D9 as Candidate Alloys for Supercritical Water Reactors
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Corrosion Behavior of Ni Base Alloys and 316 Stainless Steel in Less Oxidizing or Reducing SCW Containing HCl
Ryutaro Fujisawa; Kenji Nishimura; Takashi Nishida; Motohiro Sakaihara; Yoshiaki Kurata; Yutaka Watanabe
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Effect of Chromium Ion from Autoclave Material on Corrosion Behavior of Ni Base Alloys in Supercritical Water
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Cracking Susceptibility of Ni Base Alloys and 316 Stainless Steel in Less Oxidizing or Reducing SCW
Ryutaro Fujisawa; Kenji Nishimura; Takashi Nishida; Motohiro Sakaihara; Yoshiaki Kurata; Yutaka Watanabe
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Stress Corrosion Cracking of Ni-Based and Fe-Based Alloys in Supercritical Water
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Corrosion of Austenitic Alloys in Supercritical Water
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Ultra Supercritical Steamside Oxidation
Gordon R. Holcomb; Bernard S. Covino, Jr.; Sophie J. Bullard; Stephen D. Cramer; Malgorzata Ziomek- Moroz
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Metallurgical Evaluation of Alloy 800HT Pigtails
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Managing Creep Strain in Steam Reformer Tubes Using Laser Based NDT
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Utilization of Aluminide Diffusion Coatings to Improve High Temperature Performance
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Metal Dusting Performance of Structural Alloys
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Materials, Design, and Fabrication Aspects of Large High Temperature Equipment
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Adapting Metal Dusting Research to Trends in Syngas Technology
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Accelerated High Temperature Performance Evaluation for Alloy Optimization, Embrittlement, and Life Assessment
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Gas Phase Embrittlement and Time Dependent Cracking of Nickel Based Superalloys
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Issues in Life Assessment of Reformer Tubes
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Selection of High Performance Alloys for High Temperature Corrosion Environments
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Micro-Alloying Improves Resistance to High Temperature Environments
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.
Case Histories of Successful Applications of Alloy 602CA, UNS N06025 in High Temperature Environments
Paper presented at the CORROSION 2005, Houston, Texas, April 2005.