... Abstract Pipe stuck accident is one of the primary causes contributing to NPT (Non-Productive Time) in the drilling industry, incurring global financial losses amounting to hundreds of millions annually. For decades, Practices and techniques have been formulated and developed to avoid...

... with deployment of cutting-edge technology in Drilling viz. application of drill pipe severing tool (DPST) & under reamer tool and in Completion viz, shearable gas lift valves, trimmed swell packers, auto lift gas technology, and tapered string coiled tubing. The well also witnessed some complex fishing...

... to concluding the paper. remediation of hydrates geology geologist scale inhibition production chemistry oilfield chemistry scale remediation hydrate inhibition asset and portfolio management asphaltene inhibition asphaltene remediation wax inhibition project management wax remediation pipe...

... by utilizing a drill pipe landing string. While this is common practice, it is a practice that introduces risk as handling tools are required to be changed out during the switch over from casing to drill pipe which requires multiple personnel operating in the red zone. This risk is also present when casing...

... Abstract Early detection of stuck pipe events is pivotal due to their role as major causes of non-productive time. Although researchers have adopted data-driven approaches, such as machine learning, challenging issues persist, such as limited datasets, limited stuck pipe events, and various...

... to provide oriented images means the tool has magnetometers, accelerometers and a basic gyro measurement device that can be used for orientation of downhole devices such as whipstocks or oriented perforations. pipe operation drilling equipment log analysis mrayl evaluation casing and cementing...

... drilling equipment tong optimization problem efficiency pipe operation reduction digital solution main elevator implementation artificial intelligence upstream oil & gas tubular running operation single joint elevator service company personnel tubular running process rig floor...

... pipe interpretation operator well integrity data offshore technology conference cement and bond evaluation casing string operation existing drillpipe deplyed operation non productive time transducer Methods and Procedures There have been a multitude of differing measurement techniques...

... upstream oil & gas petronas drilling operation key performance indicator kpi histogram comparison knowledge management tripping kpis open hole drilling campaign implementation operational optimization engineer operation casing pipe slip connection time adpm tool Introduction...

... Table 1 Relative cost of MLP versus CS and hot roll bonded clad pipe The cost effectiveness of MLP is further improved when installed by the reel-lay method, although it is necessary to account for the additional operational complexity and cost of using internal...

... tolerance requirement midstream oil & gas insertion force pipe loading offshore pipeline pipe sample mifc connection acceptance criteria installation smy offshore pipeline application Introduction PETRONAS developed one of its remote gas fields, 150km offshore Peninsular Malaysia...

.... For the top tensioned configuration, the tensioning system is required to avoid the riser pipe's buckling and the Mathieu Instability at the bottom portion of the riser. On the other hand, the same phenomenon did not occur in the hang-off configuration. The LMRP and BOP attached to the bottom end kept...

... be considered within the process and utility systems to improve the energy balance. This paper will investigate the possibility to exploit the available hydraulic energy onboard offshore platforms to transform it into electrical energy. Part of the recoverable hydraulic energy is found in pressurized pipes...

... by roll bonding called Metallurgical Cladded Pipe (MCP) and mechanically expanded and fitted CRA layer in a backing steel called Mechanical Lined Pipe (MLP). This paper outlines specific issues, mitigations and lessons learnt encountered during development phase of the CRA pipeline. Several issues arise...

... Abstract Spoolable non-metallic pipe (NMP) is recently getting increased popularity as material for onshore and offshore pipeline. Even though the material is generally more expensive than conventional carbon steel, the total life cycle cost (TLCC) reduction is driven by reduction of pipeline...

... Abstract Surge and swab pressure generated during pipe tripping operations tends to result in various wellbore stability and integrity problems. To monitor these problems, prediction of these differential pressure is required for the smooth functioning of drilling operations. An analytical...

...Mismatch The main concern of using reel-lay method is the on reel local buckling and high lift off caused by the geometrical and yield strength mismatches. In an ideal world, the geometrical dimensions and yield strength of each pipe joints are the same. Unfortunately, that is not the case...

... Abstract Corrosion resistance alloy (CRA) lined pipe is one of the alternative materials for corrosion management in oil and gas application. It is generally more economical compared to CRA clad pipe. However, limited references are currently available regarding performance of CRA lined pipe...

... Logging While Drilling (LWD) data acquisition is not an option and Pipe-Conveyed Logging (PCL) is discarded because of its risky and time-consuming nature, many wells could end up without critical Formation evaluation data. To overcome reservoir access challenges in the Sirikit Field in Thailand...

... Abstract Most people know the Hybrid Riser Tower solution, combining the use of steel pipes in a freestanding bundle and multiple flexible jumpers for connection to a floating host vessel, from the 3 towers installed in 2001 offshore Angola in 1,350m water depth to the Girassol FPSO. Little...