... procedure to increase gas flow rate are shown. There is no slug catcher at the platform, then, in order to avoid shut downs due to large liquid slug arrival at process plant, the procedure to increase gas flow rate must be performed carefully. production separator scale inhibition asphaltene...

... no 3/2017/COEXP/CGMAC/DILIC budgetary cost estimate brazil site clearance abandonment path forward violation information regulation operator procedure regulatory framework infrastructure subsea facility upstream oil & gas subsea system artificial reef cost estimate offshore...

... , R. , Littlehales , I. J. "The Inportance of Appropriate Laboratory Procedures for the Determination of Scale Inhibitor Performance" . 2002 . SPE 74679-MS ( http://dx.doi.org/10.2118/74679-MS ). Emmons , D. H. , Graham , G. C. , Holt , S. P. , Jordan , M. M...

... load case characteristic angle stiffness curve fatigue damage upstream oil & gas angle value histogram slwr procedure stiffness offshore technology conference fatigue life flexible joint stiffness rigid riser plane refinement time trace riser configuration BEATTIE...

... the flow of an uncontrolled well. The objective of this paper is to identify and describe the technical considerations (the science behind the procedures) that a prudent operator must address to be able to efficiently and effectively store, maintain, mobilize, install and operate a subsea capping stack...

... personnel developed processes and procedures to reach the objective. These include advances in coiled tubing (CT) rigup procedures and using a real-time telemetry system. This approach facilitated the timely and cost effective abandonment of more than 15 wells since 2017 in a safe and environmentally...

..., the majority of operators are not prepared operationally or procedurally for this stage. Given the number of units due to reach the end of their design life in the next 10 years in Brazil alone, the need for experts in decommissioning or life extension is ever more important. The O&G industry...

... the pigging process in a gas network with many platforms interconnected. The analysys will compare total travel time and structural integrity of pigs after they arrive in final destination, given the lack of a velocity profile information in these procedures. significant difference procedure offshore...

... drillstem/well testing mother solution concentration enhanced recovery injectivity procedure offshore leonhardt upstream oil & gas injection injection water schizophyllan qualification yard test Prasad , D. , Ernst , B. , Incera , G. , Leonhard , B. , Reimann , S...

...’ start-up. This paper describes the integration of an expert system associated with anti-slug control for well start-up. The intelligent system has many heuristic rules to implement the automation of the start-up procedures, like the opening choke valve while simultaneously respecting many constraints...

... provides an indication of its latching at the surface; and disconnecting to retrieve the landing string. In the laboratory, a 500-psi slurry compressive strength was obtained after 6 hours and 15 minutes. This allowed the TOC to be tagged after 6 hours of WOC. Because this procedure does not require the 3...

... Abstract This paper presents the procedure for the calibration of a soil model represented by P-Y curves in the global finite element model of a drilling riser system using onboard measured data. In the case of lack of real data or data uncertainty regarding the soil properties of one specific...

... in technology and capability, there is always a risk of a loss of position due to equipment failures or human errors. In consequence of such event, the DP drilling unit must be able to rapidly shut in the well and disconnect the BOP. Failure during an emergency disconnect procedure may result in damages...

... procedure service line diesel pump pressure difference diesel deposition high flowrate offshore technology conference pig receiver reservoir characterization upstream oil & gas removal procedure flowrate displacement riser production line OTC-28120-MS Wax Removal Procedure Used in Pre...

... offshore ESP deployment in the North Sea, procedures and standard working instructions were reviewed and opportunities for improvements were identified. Innovative tools including a new cable spooling system and special subs were developed to increase safety and address operator concerns during ESP...

... at the beginning of a probabilistic history-matching procedure using wells and (b) 97 Δp SIM maps from history-matched models using well production data. Two sets of 4DS data were considered: (c) 125 Δp 4DS maps yielded from a probabilistic inversion considering reservoir uncertainties and noiseless synthetic...

... Abstract This paper presents a comparative study of two commonly used three-phase separator design procedures; Arnold and Stewart and Svrcek and Monnery. The procedures were developed based on droplet settling and retention time theories for the separation of gas, oil and water and are known...

... & gas procedure maintenance experiment 1 ISO 13380 / 2002 - Condition Monitoring and Diagnostics of Machines—General guidelines on using performance parameters . C. Seiffert , T.M. Khoshgoftaar , J. Van Hulse , A. Napolitano . RUSBoost: A hybrid approach...

... cement systems is low, hence there is the need for detailed analysis and action to prevent damage to cement sheath. This work demonstrates cement design procedures by evaluating cement sheath mechanical integrity in intercalated salts. A typical presalt Brazilian well with different lengths...

... several alternatives for mitigating this problem and the design procedure for each one. In order to find and list those procedures, the literature was initially reviewed. More than 15 techniques were identified and classified in four groups: pressure relief, structural strength increase, fluid...