..., The Netherlands , 23 – 25 February . SPE/IADC 92576-MS . https://doi.org/10.2118/92576-MS . Detournay , E. and Tan , C.P. 2002 . Dependence of Drilling Specific Energy on Bottom-Hole Pressure in Shales . SPE/ISRM Rock Mechanics Conference , Irving. Texas, USA , 20 – 23 October . SPE-78221...

... samples contain lighter hydrocarbons, which present lower boiling temperatures. Additionally, the remediation of oil-contaminated cuttings was promising, showing that it was possible to reach residual oil contents under 1% in mass after applying specific energies around 1.15 kWh/kg. kwh kg...

... further. modular motor specific energy society of petroleum engineers extended-reach well brazil torque monitoring bha drill pipe efficiency horizontal section friction positive displacement motor drilling operation offshore technology conference inclination drilling performance...

... and a wavelength of 1,064µm. To evaluate the structure of the samples, X-ray tomography and microtomography were employed. The specific energy was estimated at 243 J/mm3 for the carbonate rocks. The final tests to represent the well architecture were realized with samples of liner/cement/carbonate. By means...

... a cuttings flow rate of 0.75 ton/h. The specific energy of this equipment proved to be competitive to become a commercial equipment. The present experimental campaign encourages the continuation of the research with the intent to build full-scale field microwave cutting dryer to operate either at a floating...

... microwave heating technique as a method for the treatment of contaminated drilled cuttings. This drying methodology was applied to contaminated cuttings and studied through a Design of Experiments (DOE), where the manipulated variables were NAF concentration, specific energy and mass. The responding...