... is validated against two problems with analytical solutions in Section 5. The Base Case setup and results are presented in Section 6 and parametric studies are presented in Section 7. Key conclusions are summarized in Section 8. Model Formulation The following assumptions are made in the derivation...

... is implemented in assessing a stationary crack on ASTM Compact Test (CT) specimen to calculate the stress intensity factor (SIF) which the obtained results deviate from the analytical solution by less than 6% for various crack length cases. Following that, a cracked plate case treated with cold expansion...

... that the FEA gives a lower consolidation settlement as compared with the 1-D analytical solution. The FEA is able to address eccentric loadings from the complex FTA and also provide consolidation settlement at different locations on the FTA for use in the design of spools connected to it. Parametric studies...

...OFFSHORE TECHNOilJGY GOl'IFERENCE 6200 North Central Expressway Dallas, Texas 75206 THIS IS A PREPRINT SUBJECT TO CORRECTION ~:ER OTC 1519 Analytical Solutions for Coastal By Thomas E. Pease*, New York U. Currents © Copyright 1972 Offshore Technology Conference on behalf of the American Institute...

... and to reduce unnecessary over design. Engineers often ask themselves the following questions when undertaking a naval lifting problem. upper end spectral density function lift system response curve steel wire rope analytical solution emplacement elasticity response function spectrum lift...