... to produce deeper and further reservoirs in a constant evolutive oil and gas market. multiphase pump clearance operation barrier fluid hydraulic jet pump performance prediction artificial lift system qualification test seal face shaft upstream oil & gas proximity probe requirement...

... dch seal good condition seal lubricant drilling equipment lubricant test seal barrier fluid leak rate valve differential pressure Introduction to the Problem In offshore drilling there is an operational benefit to locating an RCD below the tension ring in a riser ( May, et al, 2006...

... plan deployment sea water exposure barrier fluid visual inspection qualification activity subsea processing inhibitor configuration subsea chemical storage solution tank operation offshore technology conference Introduction Maximising the use of existing topside facilities...

... subsequent phase application infrastructure temperature loss development scenario subsea system eth cable subsea long-distance tie-back capital long tieback subsea processing separation field development cable barrier fluid offshore technology conference Candelier , C. , S...

... the building blocks for other subsea processes. The presentation and paper will introduce the elements of technological novelty and will describe the process, the challenges and the results of the relevant qualifications. manufacturer application prototype industrialisation barrier fluid...

...), the specifics of the BC10 application required further development and qualification. The design pressure was increased from 5,000 psi to 7,500 psi, which required requalification of motor and barrier fluid circuit components. Additionally, the challenging multiphase flow conditions led to the development...

... opportunities including increased oil recovery, and kicking off dead wells and enabling stable well back-pressure. The fundamental benefits of subsea compression are now demonstrated. subsea wet gas compression system barrier fluid subsea processing fraction compression subsea system gullfak subsea...

.... reduce cost innovative technology subsea pump pump module installation cost savings reduction upstream oil & gas infrastructure significant cost reduction hydraulic jet pump offshore technology conference reliability multiphase pump subsea barrier fluid subsea system retrieval...

... barrier fluid (mixture of 70% mono-ethylene glycol (MEG) in water) that also lubricates the bearings. The barrier fluid-to-seawater cooler is mounted on the pump and motor assembly. The environmental static seals are all API 6A metal ring gaskets except sealing between motor and pump housings where...

... the full load torque from zero speed, thus making it suitable to overcome some of the cold pump startup challenges of the Arctic. Sealed cable-wound stator and the rotor encasement in a carbon fiber sleeve permit the use of water-based barrier fluid, which is appropriate for the Arctic fields, where...

... statoil offshore technology conference operation separation troll pilot raw seawater injection subsea processing otc 20619 barrier fluid OTC 20619 Experience to Date and Future Opportunities for Subsea Processing in Statoil Simon Davies & William Bakke, Statoil ASA; Rune Mode Ramberg & Roger...

... design including the pump modules, barrier fluid system, power supply, control and monitoring system. Data from the performance testing is included and discussed. System overview The StatoilHydro operated Tyrihans field is located on the Norwegian continental shelf approximately 22 miles (35 km) south...