... the jacket that were used to generate a 3D model for engineering design. Visual surveys with ROV and ovality measurements were taken at locations on the jacket where clamps were expected to be attached. These measurements were used in the design of the clamps. Using the results of the site assessment...

... water depth bend stiffener floater subsea system dyneema rope clamp configuration offshore technology conference wind energy mechanism tube bell mouth power cable buoyancy module bell mouth renewable energy rov winch lazy wave configuration installation vessel Introduction Power...

... that condition of the line. When the operator was satisfied that the damage had been appropriately assessed, the determination was made to repair two sections of the line. A service company was contracted to supply a 12-in repair clamp and provide all supporting functions to carry out the repair. The first...

... and divers to install a series of clamps to grip and secure the riser prior to cutting and used a Multiservice Vessel (MSV) to manage the disconnected riser for abandonment on the seafloor. The appeal of this integrated solution is that it does not interfere with the platform's topside operations...

... production in Q2 of 2019. A flowline survey performed in Q3 2019 demonstrated good alignment with the analysis predictions for buckling locations, shapes and buckle magnitudes. pipeline thermal mitigation design prediction appomattox flowline tolerance clamp buoyancy module assembly flowline...

... prior to the rocks being installed. The ROV installable attachment clamp design is reviewed along with the key points of the installation procedure. The selection of test location spacing will be discussed along with the options for life cycle survey on the system. Results, Observations, Conclusions...

... drill ships for geotechnical exploration. inner tube drilling platform actuator interface spindle joystick carousel drill head artificial intelligence control system wireline system upstream oil & gas clamp robot offshore technology conference operator core barrel sensor...

... temperature clamp flowline repair tool offshore technology conference coiled tubing pipeline connector insulation removal hpht Ayers , R.R. , "Clamping Down on Underwater Repairs," World Pipelines , October/November 2003 . Ayers , R.R. , et al , "The Effects of Thermal...

... & gas defect requirement offshore pipeline hardware repair clamp epoxy grout clamp pipeline repair system "The Development Of Subsea Grouted Tee (SSGT) For Subsea Pipeline Live Intervention" – D Q Vu, P Booth, SPE 124676, 8–11 September 2009 , 2009 SPE Offshore Europe Oil & Gas...

... environments necessitate two sensor attachment methods: (1) sensor clamp design with subsea adhesive and (2) sensor clamp design with friction surface coating. This paper addresses the adhesive attachment method. The monitoring elements consist of fiber optic sensors that are encased in a polyurethane clamp...

... Africa. Two challenges in calibration of the post installed sensors are determining the baseline or zero state of stress and sensitivity of the fiber Bragg gratings on the clamp to actual load changes on the structure. The effectiveness of the monitoring system was enhanced by calibration methods...

..., and to install a QCS diverless repair clamp connector; with the limitation that all work had to be carried out only using work class ROVs. Detailed engineering, planning, ROV tool interfacing and a complete system integration test including equipment trials were critical to minimizing vessel downtime and meeting...

... tension in both normal laying and contingency situations, employing standard friction clamps of relatively small dimensions. In case of a wet buckle or in a contingency flooded pipe scenario, the CastorOne S-Lay vessel has the capability of holding and then abandoning the pipeline in a controlled and safe...

... detection devices utilized to obtain applicable data. vortex frequency eddy current vibration restraint elevation clamp eddy current episode otc 24164 calculation offshore technology conference installation current velocity platform jacket member platform vibration inspection j...

... later. Concept of the topsides lift system The topsides lift system consists of eight sets of lifting beams, four on each side of the vessel s slot, provided with friction clamps that close around the legs of platform topsides (see figure 5). OTC 23169 5 Figure 5 One of the eight sets of topsides...

..., Helix Producer 1, in the GoM going into operation in the Helix ESG operated Phoenix field. upstream oil & gas offshore technology conference otc 21433 transponder operation stiffener envelope riser system disconnect environmental condition dts load case riser fpu buoy clamp...

... injection line with FJ at FPSO side 1 off 16?? OD gas export line with FJ at FPSO side The OOL system is composed of: 2 off 16?? ID OOL with FJ at FPSO side and FJ at SPM buoy side. tdz riser attachment scheme strain sensor strain gage clamp steel catenary riser upstream oil...

... string. During welding, the suspended pipe string is supported by a hang off table. After welding, field joint coating is applied and the pipe string including the added hex joint is lowered towards the sea bed along the tower. During lowering the pipe string is supported by a head clamp...

... clamp pipeline end midstream oil & gas pipeline repair midline tie-in sled seal connector connector pipeline OTC 21703 How an Innovative Method of using Field Proven Diverless Pipeline Repair Equipment Opened Up New Ways for Connecting New Deepwater Pipelines onto Existing Producing...

... lower qcdc clamp operation mooring system clump weight foi pull-in winch upstream oil & gas valve otc 22171 OTC 22171 DP Vessel Side Shell Mounted Disconnectable System for Deep Water Development Ian Latimer and Brian Robbie, Flexible Engineered Solutions; Majid Al-Sharif, Helix Energy...