... reservoir section upstream oil & gas complex reservoir hole size flow rate optimization calibration sensitivity configuration requirement prediction pressure drop workflow trajectory ht risk rpm design optimization offshore technology conference Introduction The Appomattox...

... as a special end effector to be handled through a WROV manipulator and requires a dedicated skid to be connected beneath a WROV of convenience for Power & Control. The tool is currently configured for pipes with an OD of approx. 450 mm but can also be applied to different sizes, with minor adjustments...

... artificial intelligence canada government climate change sustainable development power generation sustainability norway government wind energy emission reduction archetype hub power generation system phub electrical power external power supply power hub fpso configuration ghg emission...

... unit, as published by Oliveira et al. (2021) . In addition, the characteristics of the Búzios’ reservoirs directly influence well configurations and dimensioning – initial reservoir pressures up to 650 bar, followed by depletion after production started, and temperature ranges from 90°C up to 120°C...

... management united states government sub-sea system stress joint installation design criteria rigid riser petrobras operation riser configuration coating brazil government miscible method corrosion inhibition titanium mitigation offshore technology conference co 2 hydrogen titanium tube...

... in the desired target, identifying the presence of shallower layers—that could result in a poor landing—when present. Within the reservoir, the radial depth of detection achieved with a two-receiver configuration was on the order of 30 m TVD, enough to map top and base of sandstone geobodies while identifying...

..., and batteries were rigorously tested. After years of in-water testing, the vehicle surpassed TRL 6 requirements for pipeline survey and inspection scopes. The unit can work as an ROV or operate in an autonomous and tetherless AUV configuration, with a working range of 120 km, a working depth rating of 6000 msw...

... oil & gas social responsibility climate change power generation sustainability fpso turbine generator efficiency reduction emission floating production storage and offloading carbon tax sub-sea system compressor footprint turbine generator configuration cycle ga turbine power...

... configurations for the multiple line mooring system, followed by a series of dynamic analyzes to evaluate the behavior of the riser in extreme conditions. In addition, several investigations were performed to assess the functionality and the robustness of the system, including parametric studies to check...

... MW for all the doublets. Based on the ML results, the computational power and time required for field development plan simulation were dramatically reduced, and several configurations were performed. The optimal strategy for this field comprises 7 geothermal doublets, 3 for D1 and 4 for D2...

... of the mooring configuration. This could lead to opportunity for saving on the capital costs, more environmentally friendly solutions through reducing the mooring footprint, as well as better mooring integrity. The innovative polymer spring component has been introduced in the mooring industry that enables...

... at the touchdown zone (TDZ), in such configurations are very large in ultra-deep waters for FPSOs in harsh environments leading the solution to become unfeasible in some fields. Therefore, steel lazy-wave risers (SLWR), are the market solutions for those fields. Nonetheless, SLWRs are, normally, longer risers...

... completion enabled water injection rate production control injection rate offshore technology conference performance curve reservoir characterization mp valve multi-position flow valve permeability case water management completion monitoring systems/intelligent wells configuration injection...

... in recent years: high-frequency torsional oscillations (HFTO) ( Jain et. al. 2014 , Zhang et. al. 2017 ). The vibration frequency of HFTO could be identified to be in the range between ~50 Hz to above 400 Hz depending on the bottomhole assembly (BHA) and string configuration. The root cause for this type...

... accuracy pipe joint shelf break escarpment ubm configuration pipelay plastic strain Introduction When offshore pipeline technology was starting to take its first steps, the onshore pipeline industry already counted decades of completed projects. Therefore, the reference framework for whom...

... Abstract In 2017, Operator developed five feasibility studies with different suppliers to propose system configuration, select equipment and identify technology gaps to conceive a HISEP™ technology system to produce Brazilian pre-salt reservoirs, notoriously in the Mero field. A subsequent de...

... in the reservoirs and carbon resource storage-resource-management-system. It covers carbon tax credits available in the market place. Finally, the paper highlights a way forward for the industry to optimize the value chain segments with use of new technology and elaborate on configuration of regional concepts...

... riser configuration fatigue life time series slwr shape fatigue lives Introduction Steel Lazy Wave Risers (SLWRs) are an attractive deepwater riser solution as they can significantly reduce wave fatigue in the touchdown zone of risers. The cyclic loading that SLWRs experiences are both due...

... Abstract The floating wind industry requires dynamic 66kV inter array cable to be installed and hooked up to the floating structure on both ends. While first end lazy wave initiation is a common practice, the scope focus on 2nd end lazy wave installation to obtain the final configuration...

.... Constrained energy availability, coupled with the need for retrieval and replacement, dampen the cost, complexity, and carbon savings of this pathway. subsea system climate change ocean energy sustainable development sustainability wec operation configuration offshore technology conference...