...-circulation. The obtained re-circulation results in a significant increase of sediment density, in combination with a decrease of diffuser outlet flow. This will improve the diffuser discharge characteristics and further reduce the sediment plume and associated environmental impact. Secondly, a CFD study...

... a better understanding of the check valve design and how specific design details influence performance and reliability. diffuser pressure loss completion installation and operations requirement nozzle check valve upstream oil & gas check valve leakage offshore technology conference...

... and are discussed in the paper. buildup production control phase fraction attenuation reservoir surveillance wall thickness offshore technology conference venturi resolution dp measurement diffuser fouling pressure measurement detection sensor flow metering erosion sensitivity fraction...

... of an alternate design of the supersonic separators based on inducing centrifugal separation using a U-shaped diffuser is presented. Computational Fluid Dynamics models were used to simulate the design, predict the flow dynamics of the gaseous mixture, and compare to the conventional swirl type design. A bench...

.... The mixture passes through a diffuser, leaving the ejector at an intermediate common outlet pressure (Fig. 1). The ejector is a well known equipment extensively used in many industries such as chemical industry (gas-gas ejectors) and nuclear (liquid-liquid jet pumps). The oil industry limited the use of jet...

... operation riser consideration assembly tunnel construction planning riser shaft requirement diffuser zone tunnelled outfall strength riser assembly investigation outfall diffuser structure fiberglass upstream oil & gas diffuser installation OTC 6386 Design...

... of the resulting large quantities of brine. The disposal of the brine is accomplished by pumping it via a large buried pipeline through an offshore diffuser into the Gulf waters where it is dispersed by natural oceanic currents and turbulent diffusion. The Bryan Mound salt dome near Freeport, Texas was selected...

... and will tend to sink to the ocean floor. The initial dilution of the mixed effluent with seawater produced by turbulence through thee'; discharge, ports of a diffuser can be controlled by the design of the outfall to meet a predetermined. Water quality criteria. Experimental and numerical analyses of dense...