... Abstract Carbon Capture and Storage (CCS) has long been considered as a potentially means for reducing greenhouse gas emissions from carbon-intense industrial and power generation sources. Over the last few years, there has been intense discussion about the implementation and massification...

.... A big portion of the energy used on a FPSO is driven by associated gas; this gas is either burnt on GTs for power generation and mechanical drive or compressed for processing/export/re-injection purposes. Power generation alone represents the source of more than 60% of the carbon emissions of a latest...

... Abstract Carbon Capture, storage (CCS) and utilization is an integrated solution that can help to abate against carbon dioxide emissions aiding to meet local and global net zero goals. A suite of technical solutions works to capture CO2 that is emitted, followed by compression into pipeline...

... efficiency and curbing emissions as the full electrification method was not viable previously due to several reasons such as limits from local regulations on power plant sizing. Therefore, rather than solely focusing on the conceptual design of full electrification, several recently contracted FPSOs had...

... Abstract In the global effort to reach near-term reductions in Green-House Gas (GHG) emissions, all Energy Companies have set an integrated strategy for a low-carbon future. The decarbonization target makes evident the need to also quantify the carbon footprint of well construction activities...

... in terms of performance improvement and emissions’ reduction is explored. Moreover, engine performance, indicated thermal efficiency, and CO/NOx emissions are compared for different boost pressure values at varied injection timing and constant power. The tests are carried out by modeling multiple use cases...

... Abstract The objective of this paper is to provide a systematic approach to verify and validate Greenhouse Gas (GHG) emissions for a typical Gulf of Mexico (GoM) offshore oil and gas production facility. The paper discusses ways to reduce GHG emissions at the facility level and examines...

... Abstract Amidst global push towards sustainable future, efforts to drive down greenhouse gas (GHG) emissions towards net zero across all upstream assets and new developments are expected to intensify. This task has proven to be far more challenging for existing, aging offshore facilities both...

... production, add more value to its reserves and minimize greenhouse gas (GHG) emissions. All Electric concept considers all rotating process equipment to be driven by electrical motors. Based on this concept, the process plant configuration and the number of equipment trains were defined to comply...

... scope 1 & scope 2 GHG emissions. As the usual power generation systems based on the use of gas or fuel turbines are a major source of emissions for offshore production, power generation and power sources represented an interesting field of investigations. A series of scenarios for subsea systems...

... Abstract Combustion in gas turbines or diesel gensets typically represents one of the largest sources of carbon emissions on offshore production and drilling installations (second only to flaring). Significant potential exists to decarbonize these assets via electrification. Many regions...

... two centuries of anthropogenic CO 2 emission. Six first mover large-scale CCS projects in ASEAN with potential to mitigate up to 300 Mtpa CO 2 from Singapore, Indonesia, Malaysia and Thailand have been identified. Furthermore, the steps needed to implement these CCS projects are also discussed...

... oil production capacity of 60,000 bbl/d may emit as much as 0.8 Mtpa CO 2 . Therefore, the aggregate of CO 2 emission from FPSOs operating in West Africa can reach as much as 40 Mtpa. The urgent need to decarbonize FPSO operations will soon become a license-to-operate issue due to the world's...

... technology conference emission regulation design process procedure equipment verification installation Introduction The United Nations (UN) Agenda for Sustainable Development consists of 17 Sustainable Development Goals (SDGs). These SDGs are intended to be integrated and create positive...

... planning and management floating production storage & offloading intervention project management floating production system action plan requirement offshore technology conference assessment extension work program in-depth assessment life extension project replacement emission database...

... Abstract As a region, the ten countries of ASEAN emitted 1.65 Gt of CO 2 in 2020 which was 4.75% of worldwide emission. The biggest CO 2 emitting nations were Indonesia, Malaysia, Thailand, Vietnam and Philippines. This paper conducts a detailed analysis of total primary energy consumption...

... Abstract With growing worldwide consensus about the impacts of climate change, the oil and gas industry faces unprecedented pressure to redefine itself, minimize its carbon footprint, and ultimately move towards net zero emissions. It is therefore imperative that the industry can easily...

... Abstract The upcoming energy transition - necessitated by the requirement to reduce greenhouse gas emissions - will have a major impact on the offshore market. The future offshore fleet will have to comply with emission regulations and policies that become more stringent over time. Any new...

... Abstract The objective of decarbonizing the Oil and Gas (O&G) industry has led to investigations regarding offshore power generation, one of the major sources of emissions in offshore activities. Some investigations have been carried out on the integration of wind turbines into local power...

... requirement produced water treatment subsea technology compact flotation unit water management produced water discharge co 2 production line injection subsea produced water management emission case 1 production fluid flowrate Introduction Deep offshore reserves account for a significant...