... ratings, and achieving post-expanded system ratings. A feasibility study was performed which relied heavily on finite element analysis to determine the possibility of the system scale down from 12-1/4 in. to 6-1/2 in. The analysis proved the design of a monobore expandable system in the 6-1/2 in. size...

... deployed 3-axis gravity sensor with a target sensitivity of ~ 5 μGal is firstly introduced. This is followed by a feasibility study for the potential deployment as a time-lapse gravity survey (4D gravity monitoring) within the pre-salt. A conceptual pre-salt reservoir model for the Libra field, Santos...

... measurement wearable device feasibility study upstream oil & gas inspection machine learning software crawler limitation vehicle collaborative software platform software platform artificial intelligence inspection technology efficiency uav remote survey ABS Guidance Notes...

.... guaricema jacket offshore technology conference social responsibility operation reuse upstream oil & gas platform turbine sustainability scenario camorim jacket renewable energy wind farm lcoe wind turbine onshore wind farm brazil feasibility study foundation offshore wind farm wind...

... technology conference midstream oil & gas upstream oil & gas pipeline excavation assessment longitudinal stress feasibility study stability saddle bag pipeline stress slope angle risk assessment offshore pipeline gas pipeline ASME B31.8 Gas Transmission and Distribution Piping...

... as improve estimates of HC reserves. The CSEM workflow is comprised of feasibility study, survey design, data acquisition, processing, and interpretation. Survey design and data interpretation rely heavily on 3DEM modeling to properly select and plan surveys and recover the 3D subsurface resistivity image...

... gathering system proceedings pipe petrobras compression otc 19274 upstream oil & gas installation manifold flexible riser basic design configuration scr system water depth base case riser scr feasibility study flowline design cycle riser system OTC 19274 Development...

.... EPRI has recently conducted techno- economic feasibility studies of wave and tidal in-stream energy at selected locations in North America. This paper summarizes the energy resource, the energy conversion technology status, and the business case at those locations. Grid interconnection...

... (used the decrease the number of risers and umbilicals attached). riser installation platform fatigue life criterion verification top angle wall thickness feasibility study operation upstream oil & gas thickness stiffness scr design loading case riser design critical riser...

... the 'plateau' production period. From the reference fields studied during a recent comprehensive feasibility study, incremental production gains of between 32% and 41% representing additional recovery of 14 to 20 Bscf per well over 5 years were found to be possible. By accelerating rates of production...

... subject to various feasibility studies. Decommissioning of the first platfonn, Cod, is scheduled to start later this month, and it is expected that all wells on this platfonn will be plugged by fall 1998. The disposal methods for the Ekofisk Complex North are currently being studied, and preparatory...

... techniques to drill these leases will require extremely large floating drilling units and large diameter marine riser systems. This paper presents the results of a feasibility study of the use of an automated gas-lift system for a marine riser that will maintain the hydrostatic pressure in the subsea well...

... item which may affect its overall economic balance Providing reliable and accurate seismic cost estimates and tailoring survey parameters to meet simultaneously technical objectives and budgetary limits have become essential elements of the geophysicists role. Analysis technique: 3D feasibility study...

.... Phillips took over operator ship in 1992 and drilled Garden Banks Block 7 I #2, which discovered 349 feet of net gas pay in April 1993. Following a successful drill stem test on GB 71 #2 drilling was started on an appraisal well and work beganon a feasibility study to define development options...

... the paper Is presented ABSTRACT The paper is based on a feasibility study investigating the possibilities of using a HIPPS (High Integrity Pressure Protectwn System) to protect a subsea pipe- line that is not rated forjidl wellhead shut-in pressure. The study was called the Subsea OPPS Feasibilip Study...

... was very limited, Handling of cuttings from subsea satellite wells was also to be addressed. Specifically the paper describes how a feasibility study and conceptual design was carried out concentrating on the design of surface equipment for cuttings re-injection and the downhole considerations. The study...

... The paper is based upon the results of feasibility studies and conceptual designs completed in 1991 for Shell Expro UK, on the development of 'Minimum Visit' concept to be applied to existing gas producing installations in the Southern North Sea. Maintenance and operational records were examined...

... were added to Walk, Haydel's work scope. The initial Project Management task was to coordinate the preparation and publishing of the Feasibility study. This study was completed in September 1989 and SUbsequently presented to the boards of the Joint Venturers for approval. The Feasibility Study included...

... mooring. Therefore, the STLP does not need as many tendons or as much tendon strength (cross-sectional area) as a conventional TLP. Initial feasibility studies for the STLP focused on a design for 4000 ft. (ca. 120Om) water depth in the Gulf of Mexico. The results of these studies indicated that a STLP...

... height forces due to waves, e.g. drag, inertia and slam differential pressure transducer force measurement system data acquisition system cbt measurement system modification requirement electronics laboratory prototype transducer transmission feasibility study valve tubular...