... be successfully applied to reconstruct the local stress response at side shell stiffeners of an FPSO. Several sensor configurations used as input in the conversion matrix are tested and discussed. Validation is performed by comparing thousands of hours of direct sensor measurements with reconstructed stress time...

... Abstract The paper presents the development of a flue gas carbon capture solution for gas turbines on FPSOs, which is the main source of GHG emissions onboard FPSOs. It addresses the design aspects, including layout and performance, together with the execution challenges, such as construction...

... Abstract Production commenced in 2005 from the Bonga Main Field, which is a Floating Production Storage and Offloading (FPSO) + subsea development situated in between 950-1500m of water depth and about 120km offshore Lagos Nigeria. The Bonga FPSO has a nominal 20-year design life...

..., and Offloading (FPSO) vessel, more than 60% of the total greenhouse gas (GHG) emitted come from energy use and specifically fuel combustion. Such system is usually including a set of Open Cycle Gas Turbines (OCGT), for power generation or mechanical drive, with advantages of low weight and compact footprint...

... problem subsea production equipment risk and uncertainty assessment manifold modeling & simulation subsea system risk management evolutionary algorithm flowrate layout conference moored fpso artificial intelligence machine learning variation positioning fpso diameter flowline...

... of GHG emissions and safety exposure from offshore flights/travels through the Bonga i-site Asset Visualization Portal. The Structural Digital Twin (SDT) which is capable of on-demand assessment of the Hull and the Topsides structures of the Bonga FPSO (Floating Production Storage and Offloading...

... it is expected to be able to perform a conceptual design of an FPSO with: Enhanced productivity (design related) on construction, assembly, and commissioning. Reduced people on board (POB) ( HENRIQUES et al., 2022 ). Technical readiness for a net zero concept (GHG emissions). Relevant reduction...

... system infrastructure production control suction separator operation efficiency subsea reinjection compressors engines and turbines production monitoring separation and treating offshore technology conference emission subsea production equipment subsea system application fpso injection...

... using cold work technique on the Bonga FPSO (Floating, Production, Storage, and Offloading) was completed successfully. The pre-fabrication process allowed for meticulous planning and ensured accurate fitting during installation. Thirty-three pipe supports were replaced in a 10-day timeframe...

..., Storage, and Offloading (FPSO) units, which play a crucial role in offshore hydrocarbon production. The Company's decarbonization activities permeate throughout its management system. In this context, The Company sets clearly and rigorously that projects be evaluated under the Best Available Technique...

... and Offloading (FPSO) to develop the field was proposed but not supported due to a misalignment in the allowable number of FPSOs in the Oil Mining License (OML) 118 block. The block has an existing FPSO with a 20-year design life that ends in 2025 and an oil capacity of 220 Mbopd but has come off the initial...

...%), ExxonMobil (20%), Nigeria Agip Exploration Ltd (12.5%) and Total Energies Nigeria Ltd (12.5%). The BONGA FPSO, a 300m, single hull vessel with a name plate capacity of 225kbbls / day is moored off the coast of Nigeria in depths of 1200m. The Bonga FPSO was commissioned in 2005 with a design life...

... systems are dedicated to install rigid riser or flexible riser in the Floating Production Storage and Offloading (FPSO). This article presents the challenges overcome and ongoing on developing the riser & hull interface system for the pre-salt fields to speed up the riser connection and to provide...

... Abstract The purpose of this paper is to present a general overview of the new FPSO for Marlim and Voador Fields Revitalization Project, its features, challenges, and main achievements so far. The project considers two FPSO, Anna Nery and Anita Garibaldi, designed to manage a large amount...

... The subsea production manifolds and water injection terminals are connected through 8 oil production risers and two water injection risers to a Floating Production, Storage and Offloading (FPSO) facility. The FPSO has gross liquid capacity of 280 kbpd, nameplate oil capacity of 225 kbopd...

... selecting FPSOs capacities and technologies. Finally, an innovative approach to decision-making workflow, procurement strategies, and management practices, were essential to ensure the successful alignment of each capital project with corporate objectives, as well as enabling the use of new technologies...

... reservoirs of different lithologies and geologic ages, including post-salt sandstones and pre-salt carbonate. The main purpose of Marlim and Voador fields revitalization is to renew the production systems by means of decommissioning 9 existing platforms and install two new FPSO. Therefore, it is expected...

... evolution reservoir exposure configuration operational efficiency innovation climate change optimization transition adaptability fpso floating production systems strategic planning and management bonga field construction production company ltd Introduction The Bonga deepwater...

... are extreme, mega-projects must be reworked and mobilized for the new environment. Vito project is a story of change, simplification, and adaptation. upstream oil & gas fpso floating production storage and offloading united states government vito floating production system floating production...

... oilfield chemistry flexible pipe flowline corrosion fpso inspection materials and corrosion texas offshore technology conference failure mode service life subsurface corrosion asset and portfolio management sub-sea system corrosion inhibition operation annular region riser corrosion...