... is then calculated and converted into time domain using a conventional frequency domain to time domain conversion. Principal stress time series is then calculated from the combined total component stress for Rainflow counting of stress cycles. sustainability load case transfer function offshore technology...

.... Regression data is obtained for end-of-life properties. Simulations can be conducted using these properties to determine performance of the product in any state and condition and validate any load cases through classical stress combination. The characterization for VESTAPE® Nylon 12 Carbon Fiber...

... performance indicator subsea system limit state compliance strain ratio load case plastic hinge benchmarking upstream oil & gas local model assessment diagram shaft offshore technology conference damage ratio compression engineering judgement application life extension axial load shell...

... operational data form the asset and generating reports based on the as-is status is illustrated in Figure 1 below. artificial intelligence floating production system sdt floating production storage & offloading assessment load case spectral fatigue analysis approach subsea system upstream...

... Offshore Company. optimization problem structural weight benchmark design offshore platform topsides structural design subsea system optimization result artificial intelligence optimization upstream oil & gas topology optimization design stage topsides module load case truss system...

... the final structural analysis where loads from the hydrodynamic analysis are used, the contact problem is to be included. This results in an impractical processing time on one computer when considering all load cases. A superelement solution reduces the size of the model involved in the contact problem...

... installation wellhead platform vestigo whp jitang field field development optimization and planning relocation foundation load case project management jitang requirement platform suction pile operation offshore technology conference ophir location marginal field development subsea system...

...-wind-turbine design study configuration mufop renewable energy configuration social responsibility load case tower configuration national renewable energy laboratory wind energy characteristic sustainability wind turbine Bae , Y. H. , Kim , M. H. ( 2014 ), "Coupled...

... wind speed surface current velocity upstream oil & gas load case red alarm total wave height Wood Group Kenny Ireland Ltd. , " DeepRiser version 4.1 User Manual ", May 2015 Wood Group Kenny Ireland Ltd. , " DeepRiser version 4.1 Reference Manual ", May 2015 American...

...-psi-rated subsea equipment to higher than 15,000-psi applications without the additional costs related to developing new 20,000-psi-rated equipment. The design methods utilize the guidelines in technical report API Technical Report 17TR8 and load cases per API Technical Report 17TR12. Three primary...

... and operations. The scope is limited to section 5.6 "Casing design" with elaboration of section 5.6.3 "Load cases" to stepwise show one way the standard can become interactive. construction software casing and cementing operation lcwim offshore technology conference well construction life cycle...

... load case load factor upstream oil & gas subsurface safety valve OTC-28983-MS Case Study: Deepwater Design Verification and Validation Testing for Subsurface Safety Valves for HPHT Environments Dan Thai, Diana Orzechowski, Geoffrey Pinard, and Jason Henry, Schlumberger; Dennis Kaminski...

...-glass plies in the composite laminate. Testing was performed across the design temperature range (4°C to 80°C), and was used as input into the structural model of the TCP that was developed. At a pipe scale a comprehensive set of single and combined static load cases were tested, including axial...

... potential for current operational conditions. This paper presents challenges and assumptions in identifying representative load cases from a 10-year operational history. The result of the assessment was the identification of areas along the flowline with medium to high water-wetting probability...

... to the introduction of low-cost on-demand cloud computing platforms. This paper describes a massively scalable cloud based application for rapidly assessing the vertical-horizontal-moment-torsional capacity of shallow skirted foundations against thousands of cyclic load case combinations that arise from numerous...

... the strength-based design of moored systems in areas such as offshore West Africa. This work focuses on the identification of load cases for time-domain analysis of wind squall events for spread and turret moored vessels. This paper also proposes a method for determining the characteristic design value...

... to design or adjust the working pressures based on the working depths for the subsea equipment for HPHT applications. This paper suggests how to combine the design and validation guidelines of API 17 TR 8 and API 17 TR 12. It recommends the different load cases to be analyzed based on recommendations...

...-cycle. artificial intelligence simulation load case flexa simulation pitch length benchmark configuration upstream oil & gas tensile armor wire maximum strain rate nonlinear dynamic simulation solver commercial finite element solver finite element model flexible riser...

.... completion equipment diameter rule fea collapse equation slot depth equation pressure capacity thickness geometry geometrical feature upstream oil & gas external pressure capacity instability rating methodology cross-section liner hanger body load case end effect internal pressure...

... of novel materials technology. fibre upstream oil & gas test method application ply test data manufacturing process composite pipe strength composite material compressive strength pipe coupon load case offshore technology conference laminate axis thermoplastic composite pipe...