... subsea cable mean stress test result frequency copper conductor stress coefficient offshore technology conference Introduction As opposed to its bottom-fixed counterpart, floating offshore wind requires dynamic cables for its electrical infrastructure. This entails the inter-array network...

... resistance pipe embedment test result Introduction: Axial Rock Berm-Pipeline-Seabed Interactions Discontinuous rock berms can be installed over sections of HTHP pipelines ( Figure 1 ) in order to ( i ) control the amount of pipeline that feeds into buckles (to improve the fatigue performance...

... trinidad soil resistance shear strength hydraulic hammer offshore technology conference stress history reservoir geomechanics overconsolidated clay test result blow count penetration Introduction The interpreted submerged unit weight profile shown in Fig. 2 was based on both...

... and sealing performance. The test results revealed that the S-seals showed significant RGD damage. The RGD ratings were found to be similar to standard RGD test results based on NORSOK M-710 for the same elastomer. It is noteworthy that all of the seals could still hold pressure in sealing pressure validation...

... in terms of pH 2 S than the domain previously established for this grade. This allowed a new well production design, which saves one casing phase and avoids the necessity to use intermediate liners to prevent collapse. corrosion inhibition h2s management ksi ssc test result ess 125 oilfield...

... relative to the ambiguous requirements currently in the industry guidelines. Overview of SEPLA Design and Installation – Current Practice subsea system resistance disturbance anchor mooring system flap test result conclusion upstream oil & gas rotation padeye loading centrifuge...

... and results of the qualification programme performed in support of reel-lay pipeline installation. pipe test result welding solution wt test weld riser design upstream oil & gas hardenability as-welded condition wall thickness qualification programme subsea 7 requirement test weld...

... strength sleeve friction investigation cpt 2 friction residual strength test result wind energy upstream oil & gas sleeve friction value degradation shear strength jardine cptc test overconsolidated clay reservoir characterization displacement procedure shear strength degradation...

... Abstract This paper presents a summary of over 25 years of laboratory data on the monotonic and cyclic soil properties of clays in direct simple shear, triaxial compression and triaxial extension tests, at 15 deepwater Gulf of Mexico sites. The majority of the test results were obtained...

... to determine the performance boundaries of the AA chemistry. Light, medium, and dark oils from various fields were used to evaluate the performance of the AA in aqueous phases ranging from condensed water (effectively, 0% salinity) to high salinity (~12%). Test results were categorized as "pass...

... the experimental test setup and the main results that came out of the test. On the other hand, this paper also presents the comparison between tests results and TechnipFMC analytical model outcome. Moreover, combining experiments and theoretical point of view enabled reproducing the phenomenon. A better...

... condition seawater treatment reverse osmosis ro membrane module membrane upstream oil & gas test result membrane module subsea seawater treatment system Robbana , E. , Buikema , T. , Mair , C. , Williams , D. , Mercer D. , Webb , K. , Hewson , A. , Reddick...

... thousands of annuli test results. Two major oil companies have tested the automated portable inspection unit offshore on North Sea installations, with good results. data mining test result prediction model riser annulus testing flexible riser annulus testing pressure sheath test personnel...

... timeconsuming and costly laboratory analysis. The design and technology elements of the salinity sensor include its ability to detect extremely small conductivity changes, with recent test results from the Colorado Experiment Engineering Station (CEESI) based on a qualification process prescribed...

... Testing; Preparation of calibration blocks and defective welds for the AUT Qualification Program. Mechanical test results of the Welding Procedure Qualification All testing requested by DNV-OS-F101 edition 2010 (Offshore Welding Standard) were successfully performed. Among those achievements...

... laboratory model testing, and analysis of field test results. The following conclusions concerning the use of Matlock (1970) soft clay p-y curves for the design of large-diameter monopile foundations are drawn: Numerical modeling and model-scale testing with rigid piles of different diameters indicate...

... upstream oil & gas test result mechanical earth model fracturing materials high pressure fluid efficiency permeability hydraulic fracturing application reservoir fracture design proppant pre-khuff formation productivity index optimization integration Schrooten , Russ...

... conference specimen stress intensity test method precipitation oilfield chemistry hydrogen upstream oil & gas resistance hydrogen embrittlement resistance alloy production chemistry h2s management hydrogen embrittlement test result corrosion inhibition corrosion management load drop...

...). The back-pressure ranges between 0 to 4,000 psi. A computational fluid dynamics (CFD) tool was also used to benchmark the test results and shorten the design cycle. Valve Design and Test Loop The new design is based on two previous designs and aims to overcome problems from previous designs...

... of the documented TQ process per DNV RP-A203 demonstrates that mechanically attached fittings can serve as a replacement for welded pipe connections on subsea hydraulics within certain application limits. Details of the TQ process, the TQ methods and specific analysis / laboratory test results for high risks...