... asia government china government hydraulic fracturing reservoir geomechanics mudstone fracture interwell communication optimization case study exhibition reservoir management oil shale rock type communication geological subdiscipline intensity execution case study tracer mudrock...

... in a mud system. The chlorine from the formation is calculated in this way. Formation water can be derived to further identify the main contributor of the fluid inside the pore system. Case studies are presented from this ultradeep tight gas reservoir that solved the fluid identification issue when...

... Abstract This paper aims to present a field-wide case study that explores the use of Echometer survey as an alternative method for acquiring static reservoir pressure data. In Field X, located in the East Malaysia Region, conventional static gradient surveys (SGS) were typically deployed...

... completion installation and operations enhanced recovery enhancement figure perforation production structural geology steam-assisted gravity drainage india government reservoir characterization crude viscous crude oil case study asia government rock type society cable electrical downhole...

... this case study of the vertical appraisal well in Abu Dhabi. Additionally, the well control and safety aspects during completion and perforation gun installation, job execution details, and well testing results will also be covered. Way forward on further enhancement of well testing outcome through...

... uae government pecg artificial lift system production enhancement candidate screening powered well-01 machine learning unlock untapped potential efficiency case study implementation stimulation abu dhabi international petroleum exhibition execution evaluation Introduction Case...

... of the additives and barite can be added. Mixing tanks should be equipped with sprinklers or other cooling system to expedite the cooling process. Conclusion and Recommendations The above case study represents the first successful case of mitigating shallow flow hazard with thixotropic gas-tight cement...

... trajectory. Besides, the work sequence and the Bottom Hole Assembly (BHA) selection are significant to avoid costly multiple trips. Moreover, a unique challenge to ensure the window is in good condition when the wireline logging job needs to conduct in an open hole. This paper provides a case study...

... a hydraulic workover unit (HWU) to perform an abandonment campaign in the offshore field. This paper presented a case study of multiple wells abandonment of which an HWU is operated. The well was completed with dual string production tubing with dual tubing and dual annulus valves in 1987. Highly corroded...

... geology hydraulic fracturing tenare reservoir scenario producer execution case study society history effectiveness kotabuana field reservoir characterization bekalo reservoir injector petroleum engineer Introduction Kotabuana field has been developed since 1971 with multiple phase...

... devices which will autonomously respond to the changing well conditions, without the need for intervention or a workover in later well life. This paper explores the modelling of three real world case studies showing that CO 2 can be kept in the liquid phase throughout the life of the asset...

... malaysia integrated ultra-deep reservoir mapping configuration detection case study tvd Field Background The stochastic inversion has been used for many years for ultra-deep reservoir mapping tool service ( Dong et al., 2015 ). The stochastic inversion process outputs tens of thousands...

... as current wells and processing parameters are not transferable. In this case study, class-based machine learning (CBML) approach is used to perform petrophysical evaluation to identify potential hydrocarbon zones in the target wells. The objective is to find solution to improve efficiency and consistency...

... ). Theoretical background The article is divided in the following sections: theoretical background, where the most representative findings related to the topic are discussed to provide a theoretical framework to analyze the data from the case study; results, where the most relevant facts found in relation...

... (Fine to Medium calcium carbonate LCM), still total losses followed by pumping again 100 bbl (Fine to Medium calcium carbonate LCM) with no success, so it has been decided to POOH and go for cement job. Abstract This article presents a unique case study where operating company, Kuwait Oil Company...

... waterflooding oilfield basin research method reservoir kazakhstan sand body sedimentary microfacies university case study Introduction The concept of flow unit was first proposed by Hearth (1984), which refers to vertically and laterally continuous reservoir rocks with similar petrophysical...

... oil & gas mishrif formation puff process multilateral well rich-ga condensate huff sagd case study wellhead pressure hartha formation condensate api gravity scf stb bopd Introduction Discovered in 1976 and estimated to hold over 16 billion barrels of original oil in place...

... to shallow water application in combination with various floating vessels. A case study is presented to demonstrate how this technology is being deployed offshore. A comparison of FEA and digital twin approach is also presented to highlight the speed and efficiency of digital twin model whereby real-time...

... cement and bond evaluation upstream oil & gas patterson completion installation and operations cement log analysis well decommissioning free pipe well logging casing and cementing cement condition new cement evaluation technology enable southeast asia case study cement...

... & gas oil-based mud turkey instability flowrate hole cleaning case study drilling fluid property drilling operation obm shale application hpnbm society of petroleum engineers record time wellbore Introduction One of the main reasons that oil-based fluids are preferred in drilling...