Skip Nav Destination
1-5 of 5
Keywords: drilling timeClose
Paper presented at the SPE Asia Pacific Oil & Gas Conference and Exhibition, November 17–19, 2020
Paper Number: SPE-202325-MS
... Finally, assuming that the recommended drilling parameters can successfully lead to the target ROP, drilling time and cost savings are discussed for each of the six studied wells and overally. Field of Study Figure 1 shows the map of the area with K oilfield marked in red located...
Ramiro Oswaldo Vasquez Bautista, Ali Baqir Al Lawati, Mohammad Reza Heidari Varnamkhasti, Aktham Ali Al Riyami, Mahmood Al Kendi, Khalifa Wahshi, Tariq Manthari, Said Burashdi, Hamed Shaibani, Salah Maqbali, Hilal Rubaiey, Humaid Al Balushi
Paper presented at the SPE/IATMI Asia Pacific Oil & Gas Conference and Exhibition, October 29–31, 2019
Paper Number: SPE-196283-MS
...) of 25 to 30k psi and 2.8- to 2.9-g/cm3 bulk density. This engineering design achieved the required 5.5°/30-m dogleg severity (DLS) and reduced the drilling time for the 8.375-in. section from 17 days to only 3.5 days, The 6-in. lateral section was the most challenging due to trajectory control issues...
Paper presented at the SPE Asia Pacific Oil and Gas Conference and Exhibition, October 23–25, 2018
Paper Number: SPE-192124-MS
... of shale gas exploitment, is made by adjusted cosine similarity in this paper. The learning index, of which data comes from adjacent well, takes drilling cost, the well length and drilling time into account. The platform location optimization model, which considers learning effect, maximum number of wells...
Paper presented at the SPE Asia Pacific Oil & Gas Conference and Exhibition, October 25–27, 2016
Paper Number: SPE-182197-MS
... will be configured for drilling with WBM concerning environmental and financial issues. drilling operation drilling time drilling fluid management & disposal Upstream Oil & Gas rise time experiment specific energy consumption Reservoir Characterization structural geology generator electric...
Paper presented at the SPE/IATMI Asia Pacific Oil & Gas Conference and Exhibition, October 20–22, 2015
Paper Number: SPE-176486-MS
... for the exploration of the unconventional resources, which will bring the encouraging technical and economic benefits. Efficiency drilling operation optimized pad design drilling time Upstream Oil & Gas completion work process construction time well manufacturing process well manufacturing concept...
Product(s) added to cartClose Modal