1-8 of 8
Keywords: elastomer
Close
Follow your search
Access your saved searches in your account

Would you like to receive an alert when new items match your search?
Close Modal
Sort by
Proceedings Papers

Paper presented at the SPE/IATMI Asia Pacific Oil & Gas Conference and Exhibition, October 20–22, 2015
Paper Number: SPE-176188-MS
... of LRP provides opportunity to unlock oil potential from idle wells in this mature area thus maximizing reserve by gaining a few more hundreds barrels of oil per day during the first year. beam pumping elastomer ESP artificial lift system selection Exhibition progressive cavity pump...
Proceedings Papers

Paper presented at the SPE Asia Pacific Oil and Gas Conference and Exhibition, September 20–22, 2011
Paper Number: SPE-145931-MS
... The shortcomings of elastomers have stimulated the development of packers which retain the qualities of the swellable packers and eliminate the limitations. This is achieved by engineering a seal that is backed by a hydraulically expanded steel body which when exposed to pressure, expands...
Proceedings Papers

Paper presented at the SPE Asia Pacific Oil and Gas Conference and Exhibition, October 20–22, 2008
Paper Number: SPE-114812-MS
... of the rubber controls the pressure difference developed across the pipe. 1 In this study, water swelling packers from three different vendors were examined at 190ºF using different brines and 15 wt% HCl acid. The effects of 15 wt% HCl acid on the swelled elastomers and exposure to low salinity aquifer...
Proceedings Papers

Paper presented at the Asia Pacific Oil and Gas Conference and Exhibition, October 30–November 1, 2007
Paper Number: SPE-110161-MS
... networks have resulted in a significant water influx problem in a South Oman field. The majority of wells produce with a water cut of at least 90% and some new wells are experiencing early water break-through. To combat this problem, swelling elastomers (SE) on wire-wrapped screen (WWS) completions have...
Proceedings Papers

Paper presented at the SPE Asia Pacific Oil and Gas Conference and Exhibition, April 5–7, 2005
Paper Number: SPE-93594-MS
... are installed in tangent sections with less than 2 °/100 ft build rate inside 9-5/8" production casing. The design threshold for ESPCPs is up to a maximum of 15°/100 ft build rate in the tangent section. The stator elastomer inside the PCP is operated at temperatures between 135°F and 150 °F and this is below...
Proceedings Papers

Paper presented at the SPE Asia Pacific Oil and Gas Conference and Exhibition, September 9–11, 2003
Paper Number: SPE-80526-MS
..., the crude and even more so the produced water were the main cause of elastomeric degradation. Of the three bag elastomers that were tested, the best performance came from HSN and the only elastomer that was able to withstand the effects to within an acceptable margin was the perfluoroelastomer o-rings...
Proceedings Papers

Paper presented at the SPE Asia Pacific Oil and Gas Conference and Exhibition, October 16–18, 2000
Paper Number: SPE-64395-MS
... a typical application of the data in a Plug and Abandonment design (i.e. the Finite Element Engineering design of a thermally pre-stressed ‘rubber’ abandonment plug). silicone rubber elastomer cornelissen shrinkage upstream oil & gas apparatus material property cement formulation operation...

Product(s) added to cart

Close Modal