... The installed system was modified to update acquired data, including pressures, temperatures, inverter speed, etc., to conforms to the necessary structure for data management. The system server was linked to the SCADA system through programming and physical connections, including a fiber optic...

...Surface equipment Controller Motor valve Lubricator with appropriate internals Plunger catcher Arrival sensor artificial lift system gas lift well lift installation pagl system plunger lift system gas well production gain surface pressure chart gas lift...

... in 3batches.This was achieved by spudding on well A and drilling and cementing the first section 16" Hole.The rig is then skid to well B to start drilling the first section again,meanwhile in well A is nipple down the Diverter,install wellhead section offline.This operation is repeated till well #10 in the last...

... power consumption, ESP run life, and production sustainability. The parameters are presented for three different case studies which compare three production wells equipped with conventional asynchronous ESP motors (AM) and PPM motor. The campaign for PMM installation was started in 2019. Now, 40...

... Pipeline reeling is a common cost effective method frequently employed for the installation of offshore pipelines up to 0.5 metres in diameter. Individual lengths of pipe are fabricated into longer stalks lengths between one and three kilometers in length at a specialised onshore spool base...

... this, a pilot project was initiated, introducing the innovative Boron Diffused Erosion Resistant Through Tubing Sand Screen (ER TTSS) technology. The results obtained after installing this technology showed promising improvements in well performance. Boron diffused ER TTSS represents an advancement...

... environmental metocean and water depth range from 70 m – 100 m is limitation of crane barge for installation of offshore jacket platform. With metocean criteria and water depth in Natuna Sea, the minimum jacket weight using conventional design is about 1000 ton lifting weight, in 2019 during the Medco E&P...

... plan has been developed with the scope as follows; leaking point identification, remedial cementing which include the installation of additional 9-5/8″ as "suspended" tie back casing, and barrier verification test. This paper is describe the process to recover both surface and wellbore well integrity...

... issues such as sand migration, gas handling, reservoir souring and scaling may also contribute to the system's inefficiency, which may result in system failure. Installing an ESP especially with an inverted pump does need an extensive monitoring capability be it downhole or on surface. Lack of essential...

... in offshore conditions, these wells are using specialized, feed-through-ESP hydraulic packer that enables ESP cable and gas vent line to be passed through. To ensure these wells reach the economic limit of ESP installation, this hybrid completion design is used; utilizing ESP as the main artificial lift...

... will discuss the performance of Malaysia's first installation of bonded bead sand screen in Well A. In contrast to conventional wire wrap or mesh filtration media, bonded bead sand screen incorporates tightly fused beads in cartridge form that act as depth filter to exclude sand, installed on a flushed...

... equipment scssv operation upper completion system integrity deepwater gas field packer system execution operator south china sea installation seating nipple hydraulically assembly Deepwater subsea wet-tree completions differ from conventional dry-tree completions due to their unique...

...Transportation & Installation Engineering Main objectives for Transportation &Installation Engineering of the project are as follows: Abstract ZEEpod is a tripod-based structure that is designed for shallow water and could be the possible attractive solution for marginal fields...

... the screen opening size, screen length, location and conveyance method. Post-installation, the opening up of the well is in accordance with the bean up procedure to avoid sudden surge or high velocity flow that can damage the screen. In addition, acoustic sand monitoring and sand sampling were also performed...

... was quickly made safe by closing a primary barrier, the downhole surface-controlled subsea safety valve (SCSSSV), and installation of a secondary barrier in the form of plugs downhole. To bring production back, the root cause was investigated, and it was determined that the straight-bore metal-to-metal seal...

... leakage line. Various improvements and dry gas seal system modifications were carried out to cope with the dry gas seal failures, such as the installation of duplex seal gas strainer to allow strainer replacement without shutting down the compressor. Furthermore, the Electrical Heat Tracing (EHT...

... While some approaches are possible for shallow water and/or platform application, this might not be economically viable for deepwater or subsea operation. For example, well intervention to install through tubing sand control for subsea well can be very costly, while topside solid management might...

... adequate safety factors during installation. An optimum design requires partial foundation uplift during pile sequencing, while the areas in compression have an adequate margin of safety. A method has been developed to analyze any polygon foundation shape, which allows for uplift on any part of the mudmat...

... the requirements of a specific well to optimize its production. The jet pump has no moving parts and most of the time can be deployed rig-less, which drastically decreases the installation cost and time for the Operator, translated consequently to decrease the well's kick-off time to start flow. This lift system...

...), Fusible Plug loop installation only (instead of redundant protection using Flame Detector system), non-provision of dry fire water mains, application of Passive Fire Protection (PFP) only after confirmation from fire risk study (risk-based approach), and considering not permanently manned installation, 1...