... rated RSS (150°C) are used instead. The first well (offset well H-5) was drilled using this methodology and achieved a 1000m lateral section, however the tools were exposed to operating temperatures of 172°C. The operating temperature exceeded tool specification and resulted in significant Damaged...

...-entering laterals and ensuring precise placement of intervention tools and fluids within the wellbore. However, the lack of downhole data during these operations has historically made the confirmation of lateral reentry a challenging and time-consuming task, particularly in rig-based interventions...

... Abstract This paper provides a comprehensive overview of the TAML Level 2 multi-lateral well by the Field Operator, which features a permanent limited entry liner completion in both laterals to enhance the reservoir productivity. The well marks a significant technical achievement...

... independently using multilateral completions, granting full accessibility of the laterals while achieving production monitoring and reservoir surveillance. well integrity completion equipment directional drilling zonal isolation strategic planning and management reservoir completion installation...

... exercise a number of measurements were taken in the performed pilot-holes, prior to drilling out the lateral or multi-lateral well which demonstrated an in-situ FG of 1.22 - 1.58 SG. Whereas experience from losses, while drilling the laterals themselves, have shown an ‘activation’ pressure of 1.14 SG...

... asia government hydraulic fracturing reservoir geomechanics frac plug enhancing fracturing perf technique-case study lateral liner figure Introduction The Bahrah field is located North Kuwait area near the Kuwait Bay, along the crest of the Kuwait arch, and south of the Sabriyah field...

... in the horizontal lateral, based on which the geomechanics properties were computed. The high-resolution borehole resistivity imager provided information both on natural fractures in the wellbore and the sedimentary textures of the reservoir ( Fig. 3 ). The pulsed neutron log provided porosity and lithology as well...

... with uneven reservoir quality and curtailed mobility. These conditions have shifted the field development from vertical to horizontal wellbore completions. Achieving complete wellbore coverage is a challenge for any frac treatment performed in a long openhole lateral with disparities in reservoir...

... experiences with the varying multilateral systems available, Woodside implemented the use of an alternative innovative multi-lateral system, which has gone through multiple evolutions and marked improvements in system reliability and installation efficiency compared to Woodside's previous multilateral...

... Well A is a horizontal well in a dry gas reservoir with a low condensate gas ratio, which included a pilot hole to select the lateral landing point. Based on the analysis of the pilot hole data, lateral landing, reservoir quality, and completion quality indicators, it was decided to finalize...

... to establish Casing exit Jetting to create lateral of desired length (30 to 100m) Both operations require separate runs with different downhole assemblies on coiled tubing. The setup allows the operator to jet with fluid of choice depending upon the geological & well fluid understanding...

... enhancement effects such as matrix stimulation will be shown separately in a future publication. Understanding of chemical reaction with matrix should be important in actual implementation in a fluid selection of multi-lateral type completions. The reservoir model is formed as the sector model (1.5 km...

... Abstract Radial jet drilling (RJD) is an unconventional drilling technology to drill multiple radial laterals by using a high-pressure liquid jet. It is a cost-effective alternative to bypass damage zones near the wellbore, restimulate the production of old wells and develop the unconventional...

... the design provides the means to optimize overall performance and lower costs for many different bit applications. bit design modeling drilling operation Directional Drilling lateral bit selection Upstream Oil & Gas Simulation downhole behavior provide insight stability configuration...

..., enhancing reservoir development. drilling operation lateral wellbore tortuosity Upstream Oil & Gas accuracy hd survey Directional Drilling trajectory mapping boundary static survey tortuosity reservoir TVD error well placement wellbore Wellbore Position OWC RMWD service placement...

... intervene in these wells. This paper discusses the successful combination of a slim OD measurement-while-drilling (MWD) tool run on coiled tubing (CT) for real-time survey of the open hole lateral wellbore, followed by a stimulation treatment at appropriate depths for all laterals in a single CT run. Saudi...

... successful, with bi and trilateral wells having laterals exceeding 2000 m in length being created without problem. The tests and field installations demonstrate the ACE joint is now a proven technology, confirming the window geometry post millout to be acceptable for lateral drilling and completion...

... Abstract A development campaign offshore Australia, with a total of 15 laterals in a challenging geological environment, has been successfully completed by Quadrant Energy. The main objectives were to geosteer and place the well path at an optimum standoff from the oil/water contact (OWC...

..., North Queensland, Australia. In 2012, a vertical well with a sidetracked lateral was drilled targeting the Lawn Hill Shale Member (Lawn), offsetting the 1990's Egilabria 1 well, which exhibited gas shows in the same interval. Egilabria 2 was the first recent vertical well in the area, which...

... at the bottom of thick reservoir. An innovative in-depth fluid diversion technique, gel barrier placement, will be a promising approach to tap the potential of remaining oil in positive rhythm reservoirs in the period of high water-cut, which involves injecting gel into the radial laterals in the vertical wells...