... for further monitoring. This paper will share the process of sand erosion and deposition risk mapping along the production system including data requirements, modelling workflow and results analysis. The approach can be replicated in other fields facing similar issues of LOPC due to sand erosion...

... horizontally at approximately 21m TVD above the GWC, exceeding the target objective of 12m TVD standoff. The second well, which was the ERD well, drilled 349m MD horizontally, approximately 6.6m TVD below the top of carbonate. Utilizing the ultra-deep reservoir mapping to identify the top of carbonate...

... μ would have such an effect on signal amplitude. waterflooding Upstream Oil & Gas mapping amplitude Reservoir Characterization signal travel time labelled water polarization saturation result show contrast agent resolution enhanced recovery Brine seal layer water flood front...

... of production of 403 approved FDPs and analyze the correlation between the operating cost of 403 FDPs and the world oil price, and create maps showing the distribution of operating cost in each clustered area in Indonesia. For the purpose of this paper, the geographical areas of Indonesia were divided into 6...

... position while drilling with respect to the pre-drilled geological model all the way out to target depth. Reservoir mapping while drilling (RMWD) and Bed boundary mapping (BBM) services both measure the distance to nearby boundaries. These services map the form and position of reservoir boundary structure...

... locations, the number of detectors installed and potential sources of release. The methods for characterizing this performance has evolved into what is known today as "Fire and Gas Mapping" or "FGS Mapping". detector mapping gas detector activation Upstream Oil & Gas calculation gas...

... with horizontal wells. The paper presents surface tiltmeter hydraulic fracturing mapping results of 15 stages treatment in two horizontal wells at the same operational period. The two wells are part of a cluster of six horizontal wells located in North of Yulin, Shanxi province. Application of this technology...

.... Abstract Clastic gas reservoirs can be made economical through effective stimulation techniques. Hydraulic fracture mapping based on seismic techniques can lead to better understanding of the effectiveness of reservoir stimulation, when combined with in-depth reservoir geology and geophysical knowledge...

.... They can be installed on the surface (to monitor the surface deformation) or mobilized in an observation well (to measure casing deformation). Fig. 2 illustrates how a fracture induces this characteristic pattern with the relative locations of the tiltmeters. Tiltmeter mapping is a direct measurement...

... Oilfield. Fracture diagnostics (microseismic and tilt mapping) and modeling analyses were conducted to understand fracture growth behavior and post-treatment well performance. The fracture orientation and dimension (length and height) for two horizontal wells were obtained from microseismic mapping...

... thickness layer scale fluid distribution upstream oil & gas deltaic cycle scale flow barrier fluid status identification water rise geologic modeling saturation information mouth bar sand body interpretation water correlation mapping geological modeling reservoir spe 93253...

... oil & gas regime production monitoring flow metering production control information dynamical system hausdorff entropy dependence rate ratio dimension index operation midstream oil & gas petroleum engineer spe 88596 regime optimization characteristic mapping ga mixture...

... (AI), generated from 3D seismic inversion, proved to be an effective measure for identifying subsurface sandbody/coal from shale. The sum of negative AI values showing single sandstone in local well region as well as whole sandstone within an oil column was mapped. This provided a sound base...

... Other needs of direct data often require that two or more mapping technologies be used together. Surface and offset or treatment well tiltmeter data could generate fracture azimuth, length, volume, height, dip, width, etc. Tiltmeter mapping is insensitive to formation properties, and the main...

..., including well testing, net pressure analysis (fracture modeling), techniques that employ open-hole & cased-hole logs, surface & downhole tilt fracture mapping, microseismic fracture mapping, and production data analysis. The bulk of the paper is dedicated to case histories that illustrate...

...Characterisation Site conditions were established by conducting a literature survey of regional conditions and by direct detailed measurement at the site. Direct measurements included geological mapping of core and underground mapping along mine openings, mechanical core testing, micro...