... on business objectives such as future drilling campaign timing and location of infill wells, as well as insights on reservoir connectivity, gas initially in place and permeability. The recommended sequence of well cleanup flows uses super-positioning of pressure signal to boost response at observation wells...

... observation well completion strategy CSS cycle Modeling & Simulation society of petroleum engineers cyclic steam stimulation cycle steam injection 10-acre pilot Kuwait Oil Company reservoir Introduction The development of viscous oil resources from this Kuwait oil field is an important...

... the pulse takes to travel from the producer to the observation well. In this paper, new formulations are presented for both linear and radial flow regimes. These are straightforward, making their application easy. Furthermore, they can detect whether pressure is propagated along channels or more extensive...

..., detection of a pressure pulse in an observed well can be used to infer inter-well reservoir connectivity, connected pore volume and transmissibility. This paper provides a method to refine reservoir pore volume ranges and transmissibility. This will be accomplished through the use of dynamic model derived...

... for predicting interference arrival at an observation well will be compared. Finally, it will be demonstrated that the classic radius of investigation equation is more appropriate in interference/communication testing, and that rate, gauge resolution, and the total system pressure drop do not affect the arrival...

... in significant errors in the estimated average reservoir properties. This paper presents the results of a study carried out to investigate the effect of layering on the pressure response at the observation well in horizontal well interference testing in a two-layer reservoir. A numerical approach is employed...

... the most comprehensive monitoring and evaluation techniques of the pilot. Upstream Oil & Gas injector enhanced recovery platform Petronas spe 109220 West Lutong lesson learnt regional eor pilot observation well co 2 injection baronia rv2 Modeling & Simulation offshore Sarawak...

... or casing in observation wells. In Duri Steam Flood (DSF) production wells, it is not possible to run conventional temperature logs in producers without pulling out tubing pumps due to the complexity of the completion. One alternative to the real-time temperature profile in DSF producers is to use...

... these responses. permeability storativity drillstem/well testing observation well drillstem testing dimensionless pressure dint equation sensitivity reservoir permeability anisotropy transmissibility tiab kx 10 interference testing upstream oil & gas spe 88537 pressure derivative type...

.... This was done after going through 4 different locations in the field to allocate the most suitable field location. Surveillance requirements have been identified for the UG dumpflood pilot. This surveillance plan involves the dumpflood injection well and 4 other observation wells. In addition to regular PLT...

... of permeability anisotropy by interference testing in multiple observation wells. Subsequently, during stimulation operations, both water and air were injected using a range of rates, pressures and durations, including highly dynamic, short duration events. Data from the active wells and the observation wells...