... A layer-cake model was set up with 37*53*9 grid blocks where porosity and permeability versus depth at the producer location are depicted in Fig. 2 . The grid block size is 300m*300m in lateral directions, and the pore volume multiplier of 30 was applied to grid blocks on side edges to mimic...

... geology modeling & simulation climate change reservoir injection surface facility injector breakthrough time production stream sequestration producer tscf Notably, this study introduces an innovative storage technique termed "in-situ," evaluating its feasibility for implementation...

... Abstract Development and monetization of the gas fields with high carbon dioxide (CO 2 ) content is one of the Petronas’s strategies to support their sustainability agenda and meet the gas demand. The key challenge associated with this type of development is producing massive amount of CO 2...

... Abstract Field A is producing from natural depletion drive oil reservoirs with large gas cap. The field was under production curtailment, governed by gas-oil-ratio (GOR) limit to preserve the reservoir gas cap size. As the field continues to produce, the oil rate has declined while GOR...

... and dynamic uncertainties through the sub-samples of selected models. The resource volume range of the existing producing wells estimated using Decline Curve Analysis (DCA) is well aligned with the range from the forecasts of the history matched (conditioned) models and is thus a good assurance of model...

... MMBOE cumulative gas had been successfully produced following the rigorous intervention and prolific subsurface approaches mentioned. Production has sustained since from beginning till now which helps to arrest the field production decline by 22% and sustain the gas supply for regional gas network...

... Abstract Delta Area-X is the newest steam flood project in Delta Heavy Oil Field in Riau Province of Sumatra, Indonesia. The area currently produces 12,000 BOPD from 450 oil producers and 145 steam injectors that are supported by high proactive optimization that consists of steam cyclic...

... property. New injectors were placed in the lack of pressure area identified by Pore Pressure Index (PPI) map to provide pressure support to new and nearby existing producers. Proppant fracturing was also proposed in the infill wells to allow the production and improve injection distribution. The infill...

... simulation numerical simulation result reservoir drilling operation enhanced recovery scenario deploying maximum reservoir contacting artificial intelligence carbonate reservoir wellbore breakthrough producer optimization trajectory mrc Introduction Maximum Reservoir Contact (MRC) well...

... for a ‘finite energy gas lift system’ – using gas produced from a deeper, high-pressure reservoir through a previously idle well as gas supply to the gas lift headers. This required installation of a new flowline to connect the well directly to the gas lift headers. Success of the implemented ‘finite energy...

... field. Field XYZ is a prolific oilfield with a strong gas cap and moderate water drive. The operator has planned a new greenfield campaign to boost declining production by drilling new horizontal oil producers from the existing well centers. The Late Oligocene - Miocene sandstones are well known...

... and concentration of primary and main slug. According to the predicted produced agent concentration and water cut curve trend from numerical simulation, the implement criteria of secondary slug, and supplementary slug are provided. The interwell connectivity analysis indicates that the permeability between...

... Abstract Objectives/Scope The Laverda Field is an offshore waterflooded field developed with two long horizontal producers targeting two stacked high quality sandstone units. The oil producer LAV02ST2 is completed with sand screens and Inflow Control Devices (ICDs). Elevated Gas Oil Ratios...

... be triggered by H 2 S enrichment carried by the formation water localized in-situ generation of biogenic H 2 S (BSR) due to "infection" of the reservoirs with H 2 S producing bacteria by drilling mud or stimulation of H2S-producing bacteria residing in the reservoirs triggered by the change...

... production enhancement efficiency injector producer watercut oil production workflow production monitoring downhole intervention upstream oil & gas attic oil column injection rate visualization dashboard facility management wrfm opportunity identification wof module Introduction...

... and resulting into early water break-through due to viscous fingering. Hence, sharp rise in water cut (~ 80 %) is observed in early phase of the production. Due to unconsolidated sand and viscous nature of the crude oil all the producers are completed with gravel pack and SRP/PCP since inception 4 . General...

... Below are the assumptions for STIR: Injected water is providing support to producers and there's no wastage of water in Aquifer. There are no wells in transient condition. There's no major activity planned in short-term which can change the current reservoir, well or facility...

...) Connectivity solver module – where connectivity between injectors and producers is quantified using a 2 year history match period, 2) Fractional Flow solver module – where oil rates are established as a function of injection rates, 3) Verification module – which is a blind test to assess history match quality...

... the efficiency of CO 2 injection in enhancing the recovery in rich gas condensate reservoirs through the following main steps: Step-1. Identifying the severity of the condensate banking, through modeling condensate formation around producers and its impact on reducing well productivity. Accurately...

...Pressure Transient Analysis Abstract The Wheatstone gas field located in the Northern Carnarvon Basin offshore Western Australia achieved first gas in mid-2017. All seven foundation producers are equipped with permanent downhole gauges (PDHGs) for real-time pressure monitoring. Data from...