1-20 of 126
Keywords: water cut
Close
Sort by
Proceedings Papers

Paper presented at the SPE/IATMI Asia Pacific Oil & Gas Conference and Exhibition, October 12–14, 2021
Paper Number: SPE-205703-MS
... xyz field water cut production performance fracture geometry reservoir hydraulic fracturing design mem Introduction In general, Alpha reservoir is categorized as caprock and consists of mostly impermeable shale that can hold the oil from moving vertically to the layer above. That is why...
Proceedings Papers

Paper presented at the SPE/IATMI Asia Pacific Oil & Gas Conference and Exhibition, October 12–14, 2021
Paper Number: SPE-205732-MS
... water cut installation operation petroleum engineer Introduction Throughout the lifetime of a well, the production from well declines gradually. When the amount of water cut is increased, the hydrocarbon output is further reduced. Numerous boosting techniques are often employed to increase...
Proceedings Papers

Paper presented at the SPE/IATMI Asia Pacific Oil & Gas Conference and Exhibition, October 12–14, 2021
Paper Number: SPE-205745-MS
... upstream oil & gas calculation artificial intelligence waterflooding this well target layer formation pressure well pattern reservoir original fracture water cut in-situ stress vector fracture orientation fracture fracture pressure drainage area layer selection Introduction...
Proceedings Papers

Paper presented at the SPE/IATMI Asia Pacific Oil & Gas Conference and Exhibition, October 12–14, 2021
Paper Number: SPE-205575-MS
... water cut to ~80%. Polymer flood in heavy oil has received significant attention after the numerous success across the globe namely, Marmul Oman, Bohai Bay offshore China and Pelican lake Canada fields. Screening studies were conducted followed by comprehensive laboratory evaluations of chemical flood...
Proceedings Papers

Paper presented at the SPE/IATMI Asia Pacific Oil & Gas Conference and Exhibition, October 12–14, 2021
Paper Number: SPE-205534-MS
... secondary centrifugation demulsifier concentration gravity transmittance water cut separation transmission rpm Introduction Water management is an important aspect of the oil and gas industry and field development operations. At all recovery stages, water production must be managed...
Proceedings Papers

Paper presented at the SPE Asia Pacific Oil & Gas Conference and Exhibition, November 17–19, 2020
Paper Number: SPE-202227-MS
... subsea pipeline and to conduct the sensitivity study. Analysis Results from the simulation study and lab tests are then compared in order to provide an insight on how oil water slug would affect stability of the flow. Sensitivity Study Sensitivity study is conducted on water cut composition...
Proceedings Papers

Paper presented at the SPE Asia Pacific Oil & Gas Conference and Exhibition, November 17–19, 2020
Paper Number: SPE-202340-MS
... time system optimization problem global constraint well model implementation scenario upstream oil & gas optimization operation injection rate production rate valve gas lift diagnostic water cut gas injection rate Introduction The field under study is one of largest fields...
Proceedings Papers

Paper presented at the SPE Asia Pacific Oil & Gas Conference and Exhibition, November 17–19, 2020
Paper Number: SPE-202366-MS
... flowing through an orifice element at rates equal to peak and mid-life production. With liquid flow rate held constant, water cut was increased in 10% steps from 0 to 100% water content. A key component of the experimental system is a benchtop Nuclear Magnetic Resonance spectrometer equipped for non...
Proceedings Papers

Paper presented at the SPE Asia Pacific Oil & Gas Conference and Exhibition, November 17–19, 2020
Paper Number: SPE-202422-MS
... to a reduction of overall water production from an initial value between 70 and 100% to levels below 30%. Incremental oil production has been maintained in the best cases for more than 2 years after the treatments. The most significant result occurred in the first field case, where the water cut was reduced from...
Proceedings Papers

Paper presented at the SPE Asia Pacific Oil & Gas Conference and Exhibition, November 17–19, 2020
Paper Number: SPE-202445-MS
... occurs. Flow performance tests are used to measure the performance of these various flow control devices at representative downhole conditions. The comparative analysis was primarily based on elapsed time comparisons for water/oil ratio (WOR), gas/oil ratio and water cut and sensitivity to historical...
Proceedings Papers

Paper presented at the SPE/IATMI Asia Pacific Oil & Gas Conference and Exhibition, October 29–31, 2019
Paper Number: SPE-196467-MS
... mobilization characteristic during polymer flooding and lower produced polymer concentration (< 250 mg/L) could be monitored. There were three different dynamic characteristics in producing wells. First one is that some individual wells with higer initial water cut (> 80%) showed significant response...
Proceedings Papers

Paper presented at the SPE/IATMI Asia Pacific Oil & Gas Conference and Exhibition, October 29–31, 2019
Paper Number: SPE-196277-MS
... in differs greatly. The dimensionless WHT drop declines with the increase of water cut and keeps constant when the water cut is more than 40%. This paper focuses on modeling of transient temperature for the offshore production wells after shut in and summarizes the law of temperature drop in wellbore...
Proceedings Papers

Paper presented at the SPE Asia Pacific Oil and Gas Conference and Exhibition, October 23–25, 2018
Paper Number: SPE-192067-MS
... water cut. Especially in high-permeability reservoirs, water fingering through a single layer results in poor development response. The objective of this paper is to efficiently control invalid water cycling and realize a smooth flooding profile. A technology for whole-process monitoring and controlling...
Proceedings Papers

Paper presented at the SPE Asia Pacific Oil and Gas Conference and Exhibition, October 23–25, 2018
Paper Number: SPE-192049-MS
... is adopted in this design for the purpose of reducing the number of cables, simplifying the electrode structure of the sensor, as well as facilitating the integration of the sensor. Abstract The conductance sensor based water cut meter is usually used to measure content of the oil-water two phase mixed...
Proceedings Papers

Paper presented at the SPE/IATMI Asia Pacific Oil & Gas Conference and Exhibition, October 17–19, 2017
Paper Number: SPE-186188-MS
... & Gas oil production Petroleum Exploration Daqing Oilfield east china damage well society of petroleum engineers Project economics operation cost crude oil production water cut flooding water flooding exploration Introduction There are 10 onshore oilfields in East China. Among them...
Proceedings Papers

Paper presented at the SPE/IATMI Asia Pacific Oil & Gas Conference and Exhibition, October 17–19, 2017
Paper Number: SPE-186210-MS
... Pilot Test water cut University Introduction The fractured basement rocks consist mainly of granite and granodiorite from late Jurassic – early Cretaceous (108-148 Ma). The main components of granite are Microcline/Oligoclase (50-60%), quartz (30-35%) and little (5-10%) Biotite. Weathered...
Proceedings Papers

Paper presented at the SPE/IATMI Asia Pacific Oil & Gas Conference and Exhibition, October 17–19, 2017
Paper Number: SPE-186201-MS
... breakthrough completion injection water injection choke control device icd waterflood injector conversion permeability water cut case study society of petroleum engineers Platong field reservoir Oil Recovery Field Introduction The Platong field is located 500 kilometres south of Bangkok...
Proceedings Papers

Paper presented at the SPE/IATMI Asia Pacific Oil & Gas Conference and Exhibition, October 17–19, 2017
Paper Number: SPE-186212-MS
... production data Net Pay water cut conductivity field 1 fracture conductivity fractured well best-performing well Drillstem Testing drillstem/well testing fluid production rate fracture half-length bottomhole permeability fracture fracture geometry Introduction Since its introduction...
Proceedings Papers

Paper presented at the SPE/IATMI Asia Pacific Oil & Gas Conference and Exhibition, October 17–19, 2017
Paper Number: SPE-186187-MS
... method in this reservoir. To boost the heavy oil production, the application of Electric Downhole Heater (EDH) in Well KLO-X1 is being studied. Whole Klamono's production is more than 100,000 blpd within 97-99% water cut. By installing EDH, oil viscosity is decreased hence oil mobility ratio will play...
Proceedings Papers

Paper presented at the SPE/IATMI Asia Pacific Oil & Gas Conference and Exhibition, October 17–19, 2017
Paper Number: SPE-186271-MS
... Abstract Intelligent well systems are useful in controlling multiple zones, managing water, reduceing well interventions, and increasing ultimate recovery especially for the high water cut well with multiple zones. The traditional hydraulic intelligent well systems are very complex, and high...

Product(s) added to cart

Close Modal