... for choosing the best liner design that keeps the produced sand and skin within an acceptable level. The test is performed at several flow rates to account for different operational conditions for Steam Assisted Gravity Drainage (SAGD) and Cyclic Steam Stimulation (CSS) wells. A Traffic Light System (TLS...

.... production control enhanced recovery flow control equipment production monitoring flow rate drilling operation oil production completion AICD Directional Drilling AICD completion pressure drop Completion Monitoring Systems/Intelligent Wells Reservoir Surveillance Upstream Oil & Gas...

... logging production control bitumen calculation viscosity flow rate refinery pipeline application Upstream Oil & Gas physical property pressure loss Reservoir Surveillance complex reservoir calibration orifice plate heavy oil equation flow measurement flowrate quadrant edge orifice...

... the pressure drop versus the flow rate at differing viscosities, confirming that the autonomous ICD effectively restricts undesired fluids, while enhancing the production of oil. Numerical simulations demonstrate an improvement of water reduction by more than 50% compared to standalone screen completions...

..., and covers an area of about 16 Km by 5 Km. An appraisal programme culminating in the 2012, 9/03b-7, 7Z extended well test (EWT), has addressed the key technical concerns associated with developing the viscous crude in an offshore environment. The programme demonstrated how sustainable commercial flow-rates...

...-heavy oil Upstream Oil & Gas porous medium Modeling & Simulation concentration viscosity polymer concentration Chauveteau polymer flooding injection reduction experiment retention polymer solution polymer flow rate polymer slug porous media reservoir Intoduction Heavy...

... of these systems according to well geometry, oil viscosity, targeted flow rate and the recovery method. The assessment and ranking were mainly based on vendor quoted capabilities, focused wellbore modelling and lessons learned from other heavy oil field cases around the world. While significant experience with rod...

... and water-based mud filtrate results in a long cleanup time to obtain samples with an acceptable level of contamination. Tool sticking and wellbore stability issues add to the challenges in open-hole fluid characterization and testing. Increasing the flow rate to reduce cleanup time does not help mostly due...

... petrophysical evaluation assessment evaluation injection cyclic steam injection steam-assisted gravity drainage flow rate steam injection thermal stimulation high temperature pressure-temperature profile complex reservoir concentration completion samaria 915 temperature log steam quality htp...

.... The results indicated that RRF for ethanolamine-polymer solution is always higher at each flow rate tested in comparison to NaOH AP solution which is beneficial for oil recovery. Core flooding experiments were tested in homogeneous sand pack and the performance of ethanolamine-polymer and NaOH-polymer...

... increase the pressure drawdown required for production by several times and hence affect the production. The well inflow performance calculated using the simulator shows that, as the exponent of the power law model decreases, the production flow rate decreases. Thus, in comparison to a Newtonian behavior...

... mesh spe 150419 stator upstream oil & gas prediction structure parameter pcp artificial lift system flow rate complex fluid flow application mechanical modeling differential pressure society of petroleum engineers equation progressing cavity pump viscosity metallic stator...

... increase in flow rate causes large drag on sand grains and excess pressure drawdown. A thoughtful mix-up of technology, understanding of rock mechanics, innovative operating techniques and proper coordination by aligning all concerned has helped in meeting the challenge of sampling viscous oils...