... with the faults interpreted at seismic scale to unravel their structural connection. Fracture lengths are obtained from curvature maps by direct measurement of lineaments matching the azimuth of each family. A logarithmic fit of the known values allows extrapolating values of fracture lengths and spacings below...

.... This study provides a new workflow for quantitative fractured reservoir description, and application of such a data set to improve fractured reservoir simulation. fracture porosity spe 130725 complex reservoir upstream oil & gas fracture connectivity aperture thickness fracture length...

...-Smith method, it is observed that technically the fracture job has been successful. Technically successful fracture job implies that adequate growth of fracture height and fracture length has taken place. Fluid loss has been more in the case of Heera-I, which has hindered initial propagation...

..., the first reducing the much-desired large fracture conductivity and, the second, providing an impediment to flow, which becomes important because of short fracture lengths. For long fractures and short penetrations of fracture-face damage the reduction to the well performance is insignificant. In gas...

... spe 64789 simulation simulator pay zone fracture height growth upstream oil & gas in-situ stress perforation erosion bpm injection fracture fracture length fracture 1 computer simulation fracture 2 flow rate height growth screenout hydraulic fracturing Introduction...

... way & methods for the development of low-permeability reservoirs. P. 303 simulation hydraulic fracture reservoir permeability displacement efficiency application selection fracture length optimum design economic efficiency production rate efficiency permeable reservoir...

... the etched fracture length. Many X 103 m3/d with an initial rate of about 39 X 103 m3/d. The acid fracturing treatments using this technique have been results are summarized in Table 1. The objective of acid executed in some fields all over the world.4 fracturing in carbonate is to create conductive channels...

... hydraulic fracturing stimulation fracture face fracturing materials drilling fluid property drilling fluid chemistry fracture net pressure frac and pack upstream oil & gas net pressure behavior permeability proppant formation permeability geologist fracture length pressure profile...

... productivity treatment design concentration fracture length roodhart proppant pack permeability INTRODUCTION Hydraulic fracturing treatments are frequently required to ensure economic production rates from wells completed in low to moderate permeability formations. This type of stimulation...

... transient analysis fracture length loss test correlation INTRODUCTION The use of various fracturing methods for stimulation of wells has become a common procedure in the oil and gas industry. Fracturing treatments are performed on wells of various potentials to help increase production...

... to 30 mD). barrier penetration fracture length penetration fracture containment permeability perpendicular acid upstream oil & gas reservoir characterization viscosity fracture profile hydraulic fracturing society of petroleum engineers dilution simulation reservoir...

... production rate production forecasting method productivity critical rate drillstem/well testing reservoir property conductivity drillstem testing permeability upstream oil & gas reservoir drainage area reservoir height fracture length hydraulic fracturing fracture drive reservoir...

... ABSTRACT Optimization of fracture length and well spacing can be critical to the economics of the exploitation of natural gas resources. If the fracture length is small compared to well spacing, then fracture azimuth will not affect interference between wells; many fields will be drilled...

... of damage to the natural fracture system is illustrated and compared to analogous homogeneous reservoirs. The economic considerations associated with many of the reservoir production mechanisms are presented. The results of the reservoir simulations indicate that optimum fracture lengths for isotropic...