Abstract
Thread compound "dope" in the vernacular, has been used routinely in assembling joints of casing and tubing. The practice in almost universal application in the oil and gas industry involves the manual application of the lubricant in a fashion that is rudimentary, non-systematic and unquantifiable. There is evidence presented in this paper that damage to the near-well zone and other unpleasant events may be associated with the thread compound.
This paper presents the results of both laboratory and field investigations quantifying the effects of the dope on near-well damage. During the assembly of tubing and casing a portion of the thread compound is exuded inside and outside the connection and gets access to the well fluids through the tubing and annular space. Studies presented here show that the dope forms a suspension which penetrates and damages the formation. The studies used standard fluid circulation velocities during typical completion operations.
To characterize and quantify the problem, core samples from the El Tordillo field, with different permeabilities were used. The samples were subjected to the circulation of the suspension created by the thread compound and the completion fluid, measuring the change in the core permeability. The work simulated the well conditions during water injection for water injection wells and during acid treatments for producer wells. A significant reduction in permeability, manifested by a fast and a very large increase in pressure, was measured, at the front face of the core sample. The same measurements showed a far smaller impact in the core body suggesting very minor penetration of dope particles.
This paper describes the laboratory and field work, with description of the test protocols, well conditions and laboratory emulation of field conditions that were used.
