... rate effect ur value vane strength anisotropy penetrometer remoulded shear strength shear strength cone laboratory measurement mlv shear strain strain rate specimen rotation 1. Introduction The remoulded undrained shear strength (sur) of fine grained soils is an important parameter...

... ABSTRACT This paper presents the results of extensive full-flow penetrometer testing conducted at the Bothkennar soft clay research site. The results of in situ penetration tests are compared to field vane tests and laboratory data obtained from high quality Laval and Sherbrooke block samples...

... ABSTRACT In most offshore design projects, in situ penetrometer tests are first correlated with element test data in order to assess a suitable resistance factor, so that effectively the absolute value of penetration resistance is not used directly. However, given the difficulty in obtaining...

... penetrometer to assess spudcan penetration in two-layered soil, additional effects such as normalised spudcan level to the soil interface and soil wedge trapped underneath the spudcan base require in-depth investigation. Based on some preliminary results of spudcan penetration tests performed in different...

...Proceedings of the 6th International Offshore Site Investigation and Geotechnics Conference: Confronting New Challenges and Sharing Knowledge, 11 13 September 2007, London, UK 461 1. Introduction The use of full-flow penetrometers, such as the ball and T- bar (Figure 1), has increased...

... the most consistent results in the predicted coefficient of consolidation. In recent years, full flow penetrometers, which were initially developed for soil characterisation in centrifuge testing5, have started to be used quite widely as one of the site in- vestigation tools for deepwater soft soil...

... at the tip of the penetrometer and the compressive wave velocity. The laboratory study The research program undertaken consisted of a series of tests carned out in the calibrabon chamber of the Laboratory 3s (Fig.1) This calibration chamber is a right, circular cylinder of depth 1.5m and of diameter 1.2m...