..., this is a hit and miss target. Since the flow rates are dynamic in any field, the facilities are frequently under or overdesigned, significantly impacting profitability. Continuous, prolonged production tests are essential to overcome the multiple challenges mentioned above, but the appropriate testing could...

... oil & gas artificial intelligence complex reservoir computational fluid dynamic proppant size perforation flow rate proppant concentration perforation orientation stage design guided stage design optimization proppant distribution design parameter screenout cfd model toe cluster...

... reservoir surveillance complex reservoir analytic model production monitoring drillstem testing accuracy production control flow metering drillstem/well testing machine learning artificial intelligence upstream oil & gas flow rate virtual flow metering test separator vfm...

... and several months of production are often required to see decline trends useful for long term forecasts. Although pressure normalized flow rate is used to reduce the effect of variable pressure (Anderson et al, 2012), we believe that the effect of skin URTeC 5096 and variable pressure on observed decline...

... of fluids, including Newtonian fluids (fresh water and glycerin solution) and slickwater with two commercial friction reducers at various loadings, were used in the tests. Test results show that perforation orientations have significant impact on proppant distribution, specifically at low flow rates...

.... The time- and space-dependent temperature solutions for all well configurations are obtained for time- and space-dependent fluid and flow properties. A sensitivity study is then performed, showing the effects ofn several parameters on the flowing fluid temperature for such parameters as the fluid flow rate...

... on many variables (flow rate, tubing ID, temperature, tube roughness, molecular weight of FR, completion fluid salinity and hardness, etc). Consequently, comparison of data across published literature and different labs is challenging unless the same flow-loop and testing procedure are used. Other...

... (100 psi) assumed it is assumed to be negligible. Viscosity is also assumed to be independent of pressure. For helium, nitrogen and methane, the viscosity varies by about one percent over this pressure range. We do not include inertial effects (Forchheimer terms) due to the low flow rates encountered...

... diffusivity LBM where multiple diffusion mechanisms namely molecular diffusion, Knudsen diffusion and transition diffusion are involved. The advective and diffusive mass flow rates at a series of water saturation states and pressure conditions in the reconstructed clay and OM structures are calculated...

... entry perforating has been extensively used to create multiple fractures within each stage of a multistage completion, even when the fracture propagation pressure varies considerably from one cluster to another. By restricting the flow rate into a single cluster-fracture, it is possible to force fluid...

... of flow rate/permeability have been achieved on both samples through fracture shear slip induced by elevating injection pressure. It is shown that ∼100 times increase in flow rate was induced by a ∼0.1 mm scale of shear slip on the two cylindrical shale samples (with ∼38 mm diameter). The permeability...

... with organic matrix in a mudrock. The overall permeability increase depends on the nanopore radii, flow rate in the microcapillaries, and the persistence of pressure difference between the nanopores and microcapillaries. A no-flow-reversal condition for the micropore network imposes limits on the nanopore...

... characterization upstream oil & gas flow rate urtec 2631 pressure gradient flow in porous media fluid dynamics back pressure effective stress core plug permeability crude oil flow experiment core sample yongjin oilfield bedding fracture URTeC: 2631 Effect Rule and Mechanism of Bedding...

... matrix diffusion unit matrix block reservoir characterization artificial intelligence equation of state fluid dynamics heterogeneous model fracture production monitoring shale gas reservoir simulation flow rate fuzzy statistical method apparent permeability machine learning reservoir...

... validated using multiple simulators, refined gridding and a semi-analytical method. It was shown that, in certain situations, the flow rate decreases when the flowing pressure is lowered . This counter-intuitive result was shown to be consistent with the physics of multi-phase flow, and is caused...

... complex reservoir fluid dynamics hydraulic fracture only flow in porous media history matching production forecast flow rate reservoir property ahm workflow algorithm hydraulic fracture epa fracture network urtec 2594 fracture machine learning shale gas upstream oil & gas main...

... influence on the mass flow rate and velocity profile in nanochannels. The predicted mass flow rates for the nanochannels with identical hydraulic diameter decrease with the cross-sectional geometry in the sequence as ellipse > equilateral triangle > square > circle. However, the ranking of velocity...

... surface area flow rate urtec 185 constraint Exhibition Artificial Intelligence complex reservoir gas well effective fracture surface area fracture surface area matrix permeability algorithm bottomhole pressure production time fracture rta method hydraulic fracture permeability URTeC...

... production monitoring production logging Reservoir Surveillance leak location chemical spill Upstream Oil & Gas pipeline 75-inch leak operator leak detection Leak multiphase flow flow rate outlet flow rate trend outlet pressure production control Artificial Intelligence...

.../shale rocks. [1] flow in porous media Modeling & Simulation Fluid Dynamics gas-oil relative permeability measurement Upstream Oil & Gas reservoir simulation flow rate capacitance Midland Basin relative permeability data experimental measurement History plug Scenario relative...