... wells technology conference unconventional resource technology conference texas fracture inversion horizontal well characterize production profile simulation fluid contribution artificial intelligence production control presented software temperature sensing shale ga horizontal well...

... upstream oil & gas integrated reservoir modeling case study urtec 3723983 production loss prediction sensitivity drillstem/well testing infill well sensitivity child well depletion impact gauge pressure data visit well well spacing horizontal well fracture Abstract This paper...

.... Additionally, as DFIT tests are generally pumped through horizontal well's toe prior to completion stage, they must compete against fracture bundle efficiency given its high costs of standby. All of this, results in short shut-in times leading to a poor DFIT interpretation efficiency [i.e., low percentage...

... the borehole resistivity image to determine the geological meaning of the reflections. Finally, the fracture results and their response on the Stoneley waveforms were used to find the permeable zone in the horizontal well. This new method of using a sonic tool has detected reflections up to 15 m away...

... fracture connection during stimulation with that during the production period. This study connects these two aspects by leveraging the low-frequency Distributed Acoustic Sensing (LF-DAS) signals acquired during the stimulation and the daily production data of 23 horizontal wells in the Denver-Julesburg (DJ...

... model calibration, and it decreased the calibration time from 1 week (manual) to 3 hours for a field-scale horizontal well, while capturing the complex fracture geometries based on accurate pumping pressure match. The procedure of this workflow is documented as follows. First, uncertainty parameters...

... energy horizontal well borehole hydraulic fracture stimulation wellbore URTeC: 3722231 Seismic diffraction imaging of reservoir fractures with DAS seismic data in a horizontal well Brian Fuller* , Sterling Seismic & Reservoir Services Copyright 2022, Unconventional Resources Technology Conference...

... Abstract Objectives/Scope This paper presents a new patented technique for gathering and delivering produced fluids from the laterals of horizontal wells to a centralized production facility to address the following challenges. First, decreasing the velocities of produced fluids results...

... reservoir geomechanics upstream oil & gas well logging presented urtec reservoir characterization complex reservoir abu dhabi shilaif formation petrophysical interpretation adnoc classification potential zone van laer base shilaif rock class horizontal well frac log analysis...

... and Zoback (2022) of stress orientations and magnitudes in unconventional sedimentary basins in North America). Thus, knowledge of S hmin and its variations with depth is especially important in unconventional oil and gas reservoirs exploited with multi-stage hydraulic fracturing in horizontal wells...

... contribution reservoir property well 2 overlapped drainage well 7 delaware basin water saturation producer horizontal well well 4 URTeC: 3723632 Reservoir Characterization and Monitoring Using Geochemical Fingerprinting Technology with Case Studies in the Delaware Basin Muqing Jin1, Soodabeh...

... Abstract A 3D numerical model is presented to analyze the gas flow behavior in hydraulically fractured horizontal wells in anisotropic heterogeneous naturally fractured reservoirs with triple porosity (organic and inorganic matrix, and a fracture network). This model generalizes the models...

... longer and longer horizontal wells in the Permian Basin. Lateral lengths in the New Mexico Delaware Basin have increased by 60% in the last 5 years. To investigate the impact of lateral length on production performance and thus define the optimal length for the highest well value, a data-driven approach...

... (BSPG3_SS) sits conformably on top of the Upper Wolfcamp well targets of HFTS-2 and represents additional reservoir potential for hydraulic fracture stimulation. The HFTS-2 operation (Figure 2) involved drilling and completing four horizontal wells (BX1H, BX2H, BX3H, and BX4H), and coring a vertical well...

... measured on condensates and gas samples collected from ≈60 horizontal wells were used to determine if high GOR wells produce: (1) a commingled mixture of different kinds of wet gas present in different Wolfcamp reservoirs related to hydraulic well stimulation; or (2) a mixture of rich wet gas generated...

... fracked horizontal wells was integrated into a sector model. Simulation of hydraulic fracturing have been performed and the sector model was calibrated to the real hydraulic fracturing data. This has allowed for a better understanding of the fracture propagation and stimulated rock volume in the reservoir...

... formation injection tests (DFIT), fluid characterization, advanced logs, geochemistry, downhole gauges, varying completions, and permanent fiber optic (FO) cable in vertical and horizontal wells. These data were integrated and used to characterize HF geometry/dimensions and resulting depletion profiles...

... drainage permian basin landing depth horizontal well fracture scenario drillstem testing upstream oil & gas depletion contribution well 2 unconventional resource technology conference vertical well drawdown pressure drop gauge parent well landing zone URTeC: 5230 New Insights...

... Abstract Success completing a horizontal well commonly relies on the identification of major changes in rock types and rock properties, which are sometimes associated with faults or fractures crossing the well path. The present project has focused on ways to delineate these important events...

... characterization directional drilling produced water discharge completion us government structural geology directional well complex reservoir upstream oil & gas directional completion injection well north dakota department horizontal well swd well flow capacity mineral resource water management...