... dependence correlation coefficient exhibition dependence thickness fracturing fluid completion installation and operations acid scatter porosity evaluation enhancing stimulation deep heterogeneous sub-hydrostatic carbonate reservoir flowback initiation F02 MANAGING MATURE FIELDS STUDY...

... in the industry were aware of the paradox of anisotropy, the problem was practically unsolvable and simply ignored. Resistivity was assumed to be a scalar, and all we cared about was Rt, so called true resistivity. If our target formations were thick, homogenous, and isotropic, then we were safe to use Rt...

... technologies of development would be geological area selection, laboratory testing, drilling and completion, stimulation and water pumping-gas production, and so on. Shale gas can be seen as coexistence of free gas and adsorbed gas, with the characteristics of widely distribution, great thickness, low gas...

... Sahara is about 200 meters thick, made of two series of shale sandstone separated by volcanic rocks. The clay fraction was studied using diffractometer and the following results were obtained: From the point of view of the clay fraction constitution, in the basin of Oued Mya the principal minerals...

... Characterization reserves evaluation estimates of resource in place physical property structural geology porosity Thickness resource in place estimate upper paleozoic group sand body coal series ordos basin Upstream Oil & Gas sandstone gas bearing formation gas generation forum 2 gas Pool...

... scale so far found in Bohai Bay oil area. Technology series dominated by prestack depth migration were adopted in the seismic target processing for Qianmiqiao area. Special processing such as well log constraint inversion had been used to predict the thickness of weathering crust. Seismic reflectance...

... hydrocarbon generated and expelled from coaly Shemshak Formation, NE Iran. The Shemshak Formation is extensively distributed in Eastern Alborz region ranging in thickness from 1500m to more than 2000m. It consist of shale, sandstone and conglomerate interbedded with several coal layers of various thickness...

... and Ordovician, the sandstones of lower Devonian (Emsian) and of Tournaisian- Strunian. All the horizons likely to form source-rocks were sampled and analysed. The northern flank of the basin shows a higher organic matter ratio with the following values: - The Ordovician, of about 2000 m thick, holds clay...

... of maturation. The source potential index (SPI) was calculated using effective thickness and average genetic potential. SPI variations indicate that hydrocarbon potentiality increases from SE to NW of the area. Based on the various isothermal and isopach maps, charge factor and entrapment style system...

... in South Sumatra has within faulted anticlines. The overlying reinforced the concept that basement is a valid thickness of Tertiary sediments in both fields exploration target in Western Indonesia and is less than 2000 meters. The likely oil source that whenever possible, wells drilled through rocks...

..., the oil and gas reserves of the stru Upstream Oil & Gas lower ordovician breakthrough prediction exploration breakthrough -take digital simulation Kuqa Depression mountain Tarim basin Reservoir Characterization Thickness Ordovician depression drilling technique exploration...

... control [5]. To reproduce cracking morphology observed in field, tests under load control have been performed and compared with Slow Strain Rate tests under displacement control[6]. Specimen thickness reduction (Loss of TESTING PROCEDURE AND ductility) was measured as B/Bo, where B is RESULTS the nominal...

... ineffective on the crude and traditional containment and skimming operations were not effective. During the laboratory analysis it was discovered that if a specific thickness of crude could be contained on the surface of the wat chemical spill Thickness Upstream Oil & Gas containment boom...

... inspection inspector operation Equipment Inspection Probe quality assurance accident Thickness diameter certification application competence operator customer Leak shutdown interpretation EQUIPMENT INSPECTION AND QUALITY ASSURANCE Jean Philippe Caruette, Total, Paris, Frunce Abstract...

... shales and Famennian-Frasnian shales, calculated from the method of the DES/EXP/SH are: 1370 Gm3 oil; 193 Tm3 gas. GEODYNAMIC EVOLUTION OFTHE ILLIZI/GHADAMES BASINS 1. Sedimentary cycles The sedimentary cover of the Illizi basin which reaches a maximum thickness of 3000 m is mainly constituted...

.... In the eastern Sichuan Basin the small folds, reverse thrusts, and small-scale faults are developed. Denudation and pinchout events are seen throughout the lines. There are rapid changes of the secondary thickness of the Triassic anhydrite formation. For this reason, the processor and the interpreter must...

... m subsea. The northern reservoir has an area of 10.5 x 2.5 km and a height of 24.7 m. The southern reservoir has an area of 12 x 4.5 km and a height of 64 m. Net pay thickness is up to 3.6 m. In structural geology deposition oil field sedimentation cycle Saudi Arabia accumulation...

... process Reservoir Characterization Thickness rock property Upstream Oil & Gas early exploration Artificial Intelligence information surface visualization application Exxon maximum information delineate discovery interpretation technology reservoir subcrop edge drilling program...

... thickness of 100 m and 4 reservoirs (Ri, Ra, R2, R3). The initial pressure was 482 kg/ cm2, this field has an oil with an API of 45" (0.806 g/cm3) and a variable bubble point from 140 to 200 kg/cm2. Two zones have been flooded by gas from 1964, and later the gas was injected in the central zones in 1971...

... to evaluate the corrosion current density underneath different epoxy-based coatings applied to protect metals against corrosion in aqueous solution. The optical corrosion-meter also has been applied to monitor pitting corrosion as well as to measure the thickness of an anodized layer of metals in solution...