... focuses on assessing the condition of steel pipe cable sections within concrete vaults, serving as protective covers for conductors transmitting up to 66,000 volts. To prevent internal corrosion and short circuits, these cables are filled with pressurized oil. However, water accumulation during storms...

... of the ground, especially at road crossings and rail crossings sections. Such transitions (aboveground to belowground) are challenging in terms of construction as it requires the installation of casing pipe(s) around the pipeline using thrust boring technology. This is done to protect the pipe/pipeline s skin...

... A and SSRT.2-3 This paper also presents implementation of ripple SSRT methodology in author s company best practices for tubular material qualification. EXPERIMENTAL PROCEDURE Materials Four pipes of super 13Cr (both 95 ksi and 110 ksi grades) from different OCTG manufacturers were used in this study...

...Paper No. C2024-20897 MARCH 3-7, 2024 | NEW ORLEANS, LOUISIANA Remnant Life Prediction for Glass-Reinforced Plastic Piping Raunak Bardia Shell Technology Center Bangalore KIADB Industrial Park North Bengaluru, Karnataka 562149 India Valeriia Khokhlova Shell Technology Center Amsterdam Grasweg 31...

... specimen reduction pipeline charging ssrt specimen toughness pipe microstructure tab weld propagation ABSTRACT In this period of transition, attention to the environment and clean sources of energy are topics that are acquiring increasing interest. With particular reference to the energy...

..., OK. 800 S Tucker Dr, Tulsa, OK 74104 2 Oklahoma State University, Tulsa, Ok 700 N Greenwood Ave, Tulsa, OK 74106 3Tulsa Community College, Tulsa, Ok ABSTRACT Many applications, including elbows of piping systems in pressurized water reactors, require ductile materials. However, the impingement...

... distribution network considered for this paper, has the following features: Operating pressure: 1.5 bar < P < 5 bar Steel pipe coated in bitumen, laid since the 1980s in clayey and sandy soils. it has a total length of approximately 26 km, still expanding. ICCP system with one T/R It is located...

... the feasibility and profitability of full replacement methods. Composite flexible steel-reinforced pipe products offer unique solutions to these challenging scenarios. Long package lengths, high tensile capabilities, and unbonded, flexible designs offer an ideal solution for the rapid rehabilitation...

... ABSTRACT Full ring ovalization test is performed in line pipe to assess the susceptibility to sulfide stress cracking when the material is subjected to load and sour service conditions. A full ring test was performed under BS 8701 standard 1 for a 36 inches welded line pipe, X65 material...

... ABSTRACT The Sulfide Stress Cracking evaluation based on Four Point Bend Test specimens (FPBT-SSC) is widely used to assess Line Pipes performance on sour environments. An important stage of the test configuration is to determine the strain corresponding to the desired load (e.g., 90% AYS...

... turbine operator sensor erosion particle noise infrastructure non-intrusive thickness sensor calculation information complimentary non-intrusive erosion pipe Paper No. C2024-20641 MARCH 3-7, 2024 | NEW ORLEANS, LOUISIANA Effective Sand Management Using Complimentary Non-Intrusive Erosion...

... installed in a hazardous area. riser corrosion subsurface corrosion pipeline corrosion well integrity materials and corrosion datalogger operator pipe orientation flowline corrosion thickness variant sensor real time system installation figure 4 pipe orientation state 1...

... ABSTRACT Part of the testing program that composite repair systems are required to undergo for qualification is the installation on pipes with various hole sizes and subsequent pressure tests. The objective of these tests is to determine the lower confidence level of the energy release rate (γ...

... that fundamentally differ from those considered when selecting and using metals. This paper presents polymer characteristics that significantly impact their use at industrial sites. The information covers hoses, lined pipe, fiber-reinforced plastic (FRP) piping and tanks, o-rings, and pipelines with liners...

...Paper No. 18919 MARCH 19-23, 2023 | DENVER, COLORADO The effect of reeling on the qualification of CRA lined and clad pipes according to NACE MR0175/ISO 15156-3: a methodology to qualify reeled pipelines Riccardo Rizzo DNV AS Thormølensgate 49a Bergen, 5006 Norway Stefan Marion DNV AS Veritasveien...

... in axially oriented cracks or crack-like features. To further build onto this successful testing, CSNRI, in conjunction with Williams Pipelines and ADV Integrity, has received pipe spools with SCC that were removed from service for testing purposes. These samples are repaired with the Atlas repair system...

...1Pa9pe0r N1o.3 MARCH 19-23, 2023 | DENVER, COLORADO Using Flexible Steel Pipe to Rehabilitate Aging Pipelines David Gregory FlexSteel Pipeline Technologies Ltd. 910 Louisiana Street, Suite 4400 Houston, Texas 77002 USA Shawn Poworoznik FlexSteel Pipeline Technologies Ltd. Suite 1040, 736 8 Avenue...

... upstream oil &amp; gas midstream oil &amp; gas h2s management asia government saudi arabia government production chemistry procedure oilfield chemistry steel mining embrittlement corrosion management united states government specimen corrosion inhibition pipe metals &amp; mining...

.... This paper is a continuation of CORROSION 2021 paper no. 16837. We will highlight the failure mechanisms, failure analysis protocols, and corrosion mitigation strategies for watermains that experience breaks. Watermain breaks are mainly due to corrosive soil, pipe material, galvanic action, stray current...

... diffusion from the inside surface has been developed with sequentially coupled assessment of temperature, stress, microstructure, and hydrogen diffusion. The model approach has been evaluated for cases of external bead-on-pipe welds onto X52 pipe carrying 800 psi hydrogen. Hydrogen diffusion into the pipe...